exxos's Atari, Amiga & retro forum

So after a long long time in fw development and 3 other cards being build since i decided to do this one... i finally decided to let this out to the wild.

@supaduper, @alenppc and @chucky are the builders once again. I do not know if Chucky will do any because he had no taste and doesnt really like the CD32. ;)

To Summarize because someone will ask... TF360 specs

1. 68060 CPU Only at up to 100Mhz (same as Tf1260)
2. 64Mb or 128Mb of SDRAM.
3. IDE port (not EHIDE) Up to about 4.5MByte/s
4. ESP Header for ESP8266 Internet (as per TF330)
5. NOTPORT - Clock port clone that does work with at least some clock port hardware.

Burst modes for RAM and all Chip ram speed fixes are included in the TF360.

NOTPORT incompatibilities will not be fixed. Either it works or it doesn't. I've tested it with Solas and some cheap clockport cards. But thats all i can do. And i really mean this.... its just there for the bling lights on the Solas.

There are no changes since the last board i had built 2 years ago. Yes the CD Drive works.

Oh man, you're killing my finances.
I only just got these and now I'll have to buy a CD32...
:-D

Great efforts & thankyou for all you've accomplished so far!

Nice one TerribleFire. The beta TF360 always gets a lot of interest at the SWAG Amiga meets.
@terriblefire does this mean the updated Firmware will get released? My CD-ROM needs to spin it's motor, so i would love to update my beta card. :)

Higgy wrote: 17 Feb 2022 19:48 Nice one TerribleFire. The beta TF360 always gets a lot of interest at the SWAG Amiga meets.
@terriblefire does this mean the updated Firmware will get released? My CD-ROM needs to spin it's motor, so i would love to update my beta card. :)

Your card is identical to the ones going on sale. There will be an update available. Im not sure how i'll push that out yet

I want it all, I want it all, I want it all and I want it now :) :thanksyellow: :bravo:

:yay:

Nice one Stephen.

Excellent news thanks for another TF card to eventually add to the collection. :D
I guess I should probably first plug the TF330 I purchased from @alenppc 2 years ago. Still have not got round to plugging it in :roll:

Very cool! Fantastic work on all the firmware changes over the last few months! Would love to buy one of the PCBs (or complete board) at some point if they are available.

Danoo wrote: 21 Feb 2022 10:18 Excellent news thanks for another TF card to eventually add to the collection. :D
I guess I should probably first plug the TF330 I purchased from @alenppc 2 years ago. Still have not got round to plugging it in :roll:

:shock: :o