Page 1 of 1
Falcon Ram upgrade by exxos, how does it fit?
Posted: 16 Oct 2021 20:55
by jacolover
finally got around to installing this after a motherboard recap, but the board doesn't fit! The top header and the bottom header are too far apart, if I put the top header over all the pins, the bottom header is not lined up and the bottom header is 3 pins too far to the left, if I line up the bottom header, the top header is 3 rows of pins too far to the right. Help!
Re: Falcon Ram upgrade by exxos, how does it fit?
Posted: 16 Oct 2021 21:01
by DoG
The ram board should fit on the right side of the motherboard. Not on the expansion port on the left.
https://www.exxosforum.co.uk/forum/viewt ... 933#p22980
Re: Falcon Ram upgrade by exxos, how does it fit?
Posted: 17 Oct 2021 03:05
by jacolover
Thanks DoG, fits great there! BTW, what is the expansion area used for?
Re: Falcon Ram upgrade by exxos, how does it fit?
Posted: 17 Oct 2021 14:27
by Steve
jacolover wrote: 17 Oct 2021 03:05
Thanks DoG, fits great there! BTW, what is the expansion area used for?
It is used for things like CPU accelerators & other accessories like the Screeneye and/or things like x86 cpu boards.