Page 1 of 1

Building a TF536 for my amiga 500+, parts query

Posted: 06 Sep 2021 00:42
by Trippy1986
Hi all

I've been getting parts for numerous builds the last few days but a few have thrown me either because they're not in stock or simply can't find them, I'm after parts for the tf536 board I bought here recently

I'm struggling to source these two
MT48LC16M16A2P-6A:G TR
SIT8008BC-83-33E-100.000000T

I've done my very best to try source parts from the same due to the crazy shipping prices but I think I've found the parts at digikey. Can someone please confirm these would work find

https://www.digikey.co.uk/en/products/d ... -G/4315922

https://www.digikey.co.uk/en/products/d ... =375808380

If anyone has any parts spate for sale for a tf536, gottagofastram board, pistorm or a ide68k I'd definitely be interested.

Thanks for the help

Re: Building a TF536 for my amiga 500+, parts query

Posted: 06 Sep 2021 01:25
by kulamario
should be ok

Re: Building a TF536 for my amiga 500+, parts query

Posted: 07 Sep 2021 14:31
by Trippy1986
Excellent thanks

I'll go ahead and order them

Re: Building a TF536 for my amiga 500+, parts query

Posted: 08 Sep 2021 05:39
by Trippy1986
My luck, ordered but is on back order so no good

How about these?

https://uk.farnell.com/micron/mt48lc16m ... 16A2P-6A:G

For the part below I can't find them in stock anywhere
SIT8008BC-83-33E-100.000000T

Anyone have any suggestions?

Thanks all

Re: Building a TF536 for my amiga 500+, parts query

Posted: 08 Sep 2021 07:44
by supaduper
Trippy I have emailed you

Re: Building a TF536 for my amiga 500+, parts query

Posted: 23 Sep 2021 15:08
by Trippy1986
Got all the parts I need but all I need are

2 x 64 pin dip sockets

Can anyone help?

Thanks to supaduper for all his help

Re: Building a TF536 for my amiga 500+, parts query

Posted: 23 Sep 2021 15:28
by Badwolf
Trippy1986 wrote: 23 Sep 2021 15:08 Got all the parts I need but all I need are

2 x 64 pin dip sockets

Can anyone help?
Perchance https://www.exxosforum.co.uk/atari/store2/#0038 ?

BW

Re: Building a TF536 for my amiga 500+, parts query

Posted: 23 Sep 2021 15:35
by terriblefire
Trippy1986 wrote: 23 Sep 2021 15:08 Got all the parts I need but all I need are

2 x 64 pin dip sockets

Can anyone help?

Thanks to supaduper for all his help
The TF536 doesnt need a 64 pin dip socket. If you install one the pins will not connect with the A500. You need turned pinstrip.

e.g. https://www.exxosforum.co.uk/atari/store2/#0132

Re: Building a TF536 for my amiga 500+, parts query

Posted: 23 Sep 2021 15:41
by Trippy1986
In that case I have everything I need.

Thanks all