PS3000 floppy wiring
Posted: 21 Feb 2021 23:46
So I was lucky enough to acquire a working PS3000 (and its enormous power supply). It just had one problem, the drive had been gutted along with all the cables, both power and ribbon cable.
I set out to try and remedy this and it took me a really long time (probably because I'm a bit dense) but also because there seems to be very little information out there on this monitor. I figured I'd post the pinout setup here (I couldn't find it anywhere myself) just to make certain it's in multiple locations...I posted to the AtariAge forums as well.
Question for everyone, has anyone ever added a second floppy drive to a PS3000? There are clearly pads labeled FDD2....
I set out to try and remedy this and it took me a really long time (probably because I'm a bit dense) but also because there seems to be very little information out there on this monitor. I figured I'd post the pinout setup here (I couldn't find it anywhere myself) just to make certain it's in multiple locations...I posted to the AtariAge forums as well.
Question for everyone, has anyone ever added a second floppy drive to a PS3000? There are clearly pads labeled FDD2....