Page 1 of 2
TF536 Programming
Posted: 01 Dec 2020 14:58
by ninjafahrer
Hi,
I ve just finished my 1st build.
How can I program the Xilinx controller - Raspberry is available.
I ve got a Revision 2B Board, but only find a Alpha Firmware at Github.
Any help is being appreciated - sorry for my beginner question :)
Re: TF536 Programming
Posted: 01 Dec 2020 15:15
by stephen_usher
Save yourself the heart break of frying the Xilinx chip and get yourself one of these:
https://www.amazon.co.uk/Waveshare-Comp ... ast_sto_dp
It'll work with the Pi and the software mentioned in the documentation but it'll be a lot safer.
Re: TF536 Programming
Posted: 01 Dec 2020 16:00
by ninjafahrer
Ok, great hint - I ve ordered one.
Can you point me as well to the last Firmware please?
Re: TF536 Programming
Posted: 01 Dec 2020 16:26
by stephen_usher
Amiga or Atari? I don't know where the Amiga firmware is, but you should be able to search the forum and find the posting pointing to it.
Re: TF536 Programming
Posted: 02 Dec 2020 00:16
by Lemaru
There's a firmware section on this forum. Latest firmwares can be found there
https://www.exxosforum.co.uk/forum/viewforum.php?f=93
Re: TF536 Programming
Posted: 11 Dec 2020 09:00
by frank.lukas
Can anyone in germany program my TF536 ?
PM me ...
Re: TF536 Programming
Posted: 11 Dec 2020 13:05
by PhilC
frank.lukas wrote: 11 Dec 2020 09:00
Can anyone in germany program my TF536 ?
PM me ...
Hi Frank, the card I've sent you has the latest firmware or is this another card?
Re: TF536 Programming
Posted: 11 Dec 2020 16:49
by frank.lukas
PhilC wrote: 11 Dec 2020 13:05
frank.lukas wrote: 11 Dec 2020 09:00
Can anyone in germany program my TF536 ?
PM me ...
Hi Frank, the card I've sent you has the latest firmware or is this another card?
Yes but I have a 1040ST Mainboard with a LightningST and my IDE Port do not longer work. So I need a Firmware with TF IDE disable. My greater Problem is that the TF536 do not work with my PuPla/Panther. And that is a no go ...
->
https://forum.atari-home.de/index.php/t ... 556.0.html
Re: TF536 Programming
Posted: 29 Dec 2020 16:25
by ninjafahrer
Hi,
today the XILINX Platform Cable DLC9LP arrived.
Totally exited I was able to install the ISE iMPACT on my W10 x64 machine,
but now I am really grounded with the software.
Starting iMPACT 64 it opens, clicking "Initialize chain" it shows the correct chip
on both TF536 I ve build, it askes for the JED files (I hope tf536r2_main_top_FULL_PHASE7 is correct)
and shows them as well, but afterwards no dialog to program the chip...
Is there some magic I am missing?
Re: TF536 Programming
Posted: 29 Dec 2020 16:29
by ninjafahrer
the last dialogue I am getting is in the attached picture
Unbenannt.jpeg