Page 1 of 1
WHDLoad 1111 Error
Posted: 29 Aug 2020 20:22
by ninjafahrer
Hi all,
I am getting an Error with basically everything I d like to run in WHDLoad (Error 1111) with my TF534.
Having a ROM 3.1 on a A500 Rev 6A board and MMULibs installed is there any hint you have for me?
Re: WHDLoad 1111 Error
Posted: 29 Aug 2020 21:48
by PaulJ_2.0
Turn on NoAutoVec in whdload.prefs in S Dir
Also make sure your max transfer is set to 0xFE00
Re: WHDLoad 1111 Error
Posted: 30 Aug 2020 08:51
by matt020
0xfe00 or 0x1fe00? All info I found points to 0x1fe00 .....
Re: WHDLoad 1111 Error
Posted: 30 Aug 2020 09:03
by PaulJ_2.0
Sorry typo, yes 0X1FE00.
Re: WHDLoad 1111 Error
Posted: 30 Aug 2020 10:24
by supaduper
Also try the switch `NOMMU` as mmu is know to cause problems with WHDload
Re: WHDLoad 1111 Error
Posted: 11 Sep 2020 18:11
by ninjafahrer
tried both, no change :(
Re: WHDLoad 1111 Error
Posted: 11 Sep 2020 18:21
by 8 Bit Dreams
Try different CPU or lower cpu seed to 40Mhz
Re: WHDLoad 1111 Error
Posted: 12 Sep 2020 16:01
by ninjafahrer
can I do that via jumper or do i need a new oscillator?