exxos's Atari, Amiga & retro forum

About to buy parts for the TF536. Question is I can save about $5 if I go with the commercial variant instead of industrial. Different BOM lists show one or the other. Safe to go with commercial to save money? I know it is rated to 70C and the industrial goes up to 85C. Seeing some posts that these can get a bit toasty but if the cpld stays under 70C then should be able to save a few dollars. How warm do they get when pushed hard?

Thanks

@weav ive used both without issue so far.

I'm using a XC95288XL-10TQG144C on my TF536, and it's working fine.
Although I haven't been testing the Amiga for more than 3 hours straight, but as I said, it has been working fine.

Makes no difference unless you want your amiga to run at -30C

Thanks everyone! Appreciate it.

I have assembled two using version C. Stressed for 30h and CPLD is 42*C. Im testing one with 110mhz oscillator and 42*C is max temp what it gets