exxos's Atari, Amiga & retro forum

Nice one tf Build finished work ok

so now time to do tests atleast 1-2 hours on each title
Doom , Nemac , Goom , Frontier
as well
Some demos you can test state of art have problems with graphics but not freeze

One of your address pins on the 68000 socket isnt soldered. A2 or A3 i think

Yeah, seems Subzero79 has tomatoes on his eyes :P :P :P
Right row, second pin ( Pin31) isn't soldered

8 Bit Dreams wrote: 02 Jul 2020 17:13 Yeah, seems Subzero79 has tomatoes on his eyes :P :P :P
Right row, second pin ( Pin31) isn't soldered

Nah, its one of those new friction fit headers.

I'm amazed its booted, still good first try Subzero, best get that pin soldered tho :D

Notice that andnsoldered A2 line the pins do contact underside

Why do you have that ram expansion board with gary adapter?
The 500+ only needs a cheap 1MB board to achieve 2MB chipmem.

Last time had ff 530 and need 1! Mb extra ranger ram

Subzero79 wrote: 03 Jul 2020 06:29 Last time had ff 530 and need 1! Mb extra ranger ram

I think whats being said is you dont need a ram expansion with a Gary adaptor on an A500+.

A basic 1Mb expansion will work without the Gary adaptor.

Removed gary adapter now runing long memory test

All seems ok cpld gets little warm .55 celsius im going yo use rasberry cooling solution
.nice work tf....