exxos's Atari, Amiga & retro forum

Annoyingly these cables With a female on each end are not freely available but just about every other type of cable is!

I do plan to stock these in the very near future if there is interest, this is the sample table I received today.

Took me several hours (across nearly a week of elapsed time) to find a 9 way null modem cable & the correct 9 way to 25 way adaptor...and I know I have a full LapLink cable set "somewhere".... :shrug:

Adapters is how I am having to do it currently as well.. But not having a proper cable was just bugging me :lol:

exxos wrote: 22 Jun 2020 22:44 Adapters is how I am having to do it currently as well.. But not having a proper cable was just bugging me :lol:

Ah yes, OCD overdrive...though I've got to admit that the length of the protrusion out of the back of the Mega ST4 with the adaptor & serial cable is worrying me in case it gets caught/knocked by someone 'visiting' my study... :shock:

It must be sticking out at least 2 inches further than the ACSI lead into the Megafile 60... :roll:

I would take one of those cables it's much nicer that the 2 cut cables I put together.

Tom

An essential diagnostic tool! Looks very similar to the one I already have, if you have a diag cart I'd recommend you get one of these, has been invaluable to me.

I have ordered 100 of these cables. It is the MOQ I could get for a custom run. I hope these will start to appear in stock in a couple of weeks time.

FINALLY!!!

Now in stock!

https://www.exxosforum.co.uk/atari/store2/#0191