Page 1 of 1

DIAGNOSTIC CART

Posted: 28 May 2019 15:19
by exxos
dc.jpg
dc.jpg (136.26 KiB) Viewed 10271 times
dc.png
dc.png (123.94 KiB) Viewed 10261 times

All-IN-ONE cartridge PCB assembled and tested. Has Atari diagnostic software for, ST,STE,MSTE,TT,030. Also has the new RAM test software by chzsoft, and GEM BENCH 6 benchmarking software.

Software is selected by jumper links on board. The settings for these are conveniently printed on the PCB itself.

Cartridge is plugged into the machine in the orientation as shown in the image above (chip and jumper side on top)


DOWNLOADS
( I have not yet found all the cart docs - but mostly info is in the service manuals - I found all these on dev-docs)

520ST-1040ST_Service_Manual.zip
(55.41 MiB) Downloaded 843 times
MegaST_Service_Manual.pdf
(4.36 MiB) Downloaded 592 times
STE_Field_Diagnostics_v19.pdf
(9.58 MiB) Downloaded 779 times
MegaSTE_Field_Diagnostics_v15.pdf
(12.4 MiB) Downloaded 587 times
TT_Field_Diagnostics.pdf
(12.75 MiB) Downloaded 606 times
Falcon030_Service_Guide.zip
(69.48 MiB) Downloaded 706 times

STORE LINK
https://www.exxosforum.co.uk/atari/store2/#0165

NOTE:
The cartridge is inserted as shown in the image (chip side up).