exxos's Atari, Amiga & retro forum

Here's my first attempt at an internal support / bracket that sits where the expansion port blank is.

This is for the Lotharek version of the board. Note, the mounting hole centres are slightly out but since I only needed the one of these I never fixed it.

I'll also adapt this next to take a compact flash to IDE adaptor when I get time.

Only other thing to say is that the support legs will need to be adjusted to length, depending on whether your shifter etc are socketed / fitted to a ram board or not.

Hopefully this link will work, LOL

https://a360.co/2Ph5XaX

Nice

:bravo:

Hmm, was this a personal effort or were you planning on selling them?

Thanks!

No, just a personal effort but thought it might of use to others on the forum.

Okay, thanks.

How do we get the STL file to print our own?

Maybe you might have to install Fusion?

https://www.autodesk.com/support/techni ... n-360.html

I'm sorry, I've changed computers twice since then and don't think I have the file any more.

Can you save from the link you provided us as it's probably under your account?

macsonny wrote: 27 Dec 2024 01:51 How do we get the STL file to print our own?

I've Fusion360, I'll see what I can do. A "STEP" file is better than STL these days by the way.