Page 1 of 1
Red PSU installed
Posted: 15 Apr 2019 14:25
by exxos
Finally put together one of the newer power supplies for one of my test machines :)
This one had the last of the black switches, I also replaced the power socket with the new one.
I thought it was time I switched up from my original Beta test PSU :)
IMG_3992.JPG
IMG_3994.JPG
Re: Red PSU installed
Posted: 15 Apr 2019 14:34
by zack4mac
The essential upgrade worth every penny :thumbup:
Re: Red PSU installed
Posted: 09 Oct 2019 20:45
by stephen_usher
One strange thing I've encountered with the Red PSU on my STE, which I've just verified tonight by swapping back the original...
NetUSBee networking doesn't work with the new PSU. This is increadibly strange given that the Exxos one is far better in terms of meeting the specification. Weird!
Anyway, just something to note.
Re: Red PSU installed
Posted: 09 Oct 2019 21:23
by exxos
These machines are fickle. Slightly higher or lower voltage on the PSU and its enough to upset some machines. One of my STE's doesn't boot with a diagnostic cartridge in. They need the bus resistor packs changing for 2.2K to make them stable. I will be putting together some kits for this in due course.