Page 1 of 1
MegaST to be restored
Posted: 01 Sep 2017 16:48
by Anzac
This is a long term project, but just wanted to share the machine status and revisions. maybe this one will be good only for display and collection purposes or to remove parts.
MegaST_6.JPG
MegaST_5.JPG
MegaST_4.JPG
MegaST_3.JPG
MegaST_2.JPG
MegaST_1.JPG
Re: MegaST to be restored
Posted: 01 Sep 2017 18:08
by rpineau
"to be restored".. so it doesn't work ?
Can you describe what it does ? (or doesn't do :) ).
Rodolphe
Re: MegaST to be restored
Posted: 01 Sep 2017 19:02
by Anzac
never tried to run it. considering the amount of dirt and corrosion, i wouldn´t feel safe in doing it before checking critical parts.
Re: MegaST to be restored
Posted: 01 Sep 2017 19:14
by rpineau
Corrosion is indeed a potential issue.
Rodolphe
Re: MegaST to be restored
Posted: 01 Sep 2017 20:21
by exxos
This may be better in the "blog" section ?
Re: MegaST to be restored
Posted: 16 Sep 2017 00:15
by Anzac
Step 1:
the Chinon D357 is STILL working!
tried it on the MSTE and it formats, reads and writes.... amazing.
(moving to blog ok for me. can i do it or has to be admin?)
Re: MegaST to be restored
Posted: 17 Sep 2017 11:23
by exxos
Anzac wrote: 16 Sep 2017 00:15
(moving to blog ok for me. can i do it or has to be admin?)
Done :)