Page 1 of 3
TF project.
Posted: 17 Nov 2018 11:25
by sety
Thank you terrible fire for your awesome open source design.
I'm starting off small. The PCB was the easiest part! $4.00AUD for 10! That's insane.
Most components are ordered and on the way.
Harder part is finding the 68020... Impossible part is finding the 144 pin socket. :(
Looking forward to completing one though even if I can't find a socket. It just means the 020 retires there.
Re: TF project.
Posted: 17 Nov 2018 14:52
by PaulJ
Sety, were did you purchase the boards and where is the info on the board? Maybe something I'm interested in. :) :) :)
Re: TF project.
Posted: 17 Nov 2018 16:19
by terriblefire
The sockets I used were the 121 pin BERG sockets.
Re: TF project.
Posted: 18 Nov 2018 02:57
by sety
PaulJ wrote: 17 Nov 2018 14:52
Sety, were did you purchase the boards and where is the info on the board? Maybe something I'm interested in. :) :) :)
Hi. I had the boards made by seeed studio. TF has all the production files on GitHub. It was really easy. Just uploaded the Gerbers and the boards were here in a week.
Re: TF project.
Posted: 18 Nov 2018 02:58
by sety
terriblefire wrote: 17 Nov 2018 16:19
The sockets I used were the 121 pin BERG sockets.
Cool! Thanks! Ordered.
Re: TF project.
Posted: 18 Nov 2018 03:30
by Steve
Is this for an Atari?
Re: TF project.
Posted: 18 Nov 2018 06:56
by Maeke
Steve wrote: 18 Nov 2018 03:30
Is this for an Atari?
atari or amiga.
Re: TF project.
Posted: 18 Nov 2018 13:36
by PaulJ
sety wrote: 18 Nov 2018 02:57
PaulJ wrote: 17 Nov 2018 14:52
Sety, were did you purchase the boards and where is the info on the board? Maybe something I'm interested in. :) :) :)
Hi. I had the boards made by seeed studio. TF has all the production files on GitHub. It was really easy. Just uploaded the Gerbers and the boards were here in a week.
Thanks, may get it a shot.
:) :) :) :)
Re: TF project.
Posted: 18 Nov 2018 14:40
by PaulJ
sety wrote: 18 Nov 2018 02:57
PaulJ wrote: 17 Nov 2018 14:52
Sety, were did you purchase the boards and where is the info on the board? Maybe something I'm interested in. :) :) :)
Hi. I had the boards made by seeed studio. TF has all the production files on GitHub. It was really easy. Just uploaded the Gerbers and the boards were here in a week.
Sety, out of curiosity where in the world are you located? Do you have the expertise to solder on ic3? Is this something you need the liquid solder and an oven for?
Re: TF project.
Posted: 19 Nov 2018 05:31
by 8 Bit Dreams
Just watch some Terrible Fire videos on YouTube and You'll see - its easy to solder these!