Page 1 of 2
RAM Boards
Posted: 04 Sep 2018 08:31
by rubber_jonnie
FYI I have received two RAM boards kindly donated by Stuart Duncan from Australia.
One is populated, one is not.
I already have one myself, so these will be made available to project people who need them.
If you're part of the project, can you please add your name on here and state if you have a RAM board, so we can determine who hasn't, and then have a fair way to pass them on.
Thanks.
Re: RAM Boards
Posted: 04 Sep 2018 09:48
by PhilC
Morning RJ,
I'm fitting one of Exxos's mmu kits but if the unpopulated one is up for grabs then I'd be happy to have that.
Re: RAM Boards
Posted: 04 Sep 2018 11:49
by Icky
Hi RJ - thanks for organising this. This is such a great community.
I have one of Exxos' Falcon Memory boards so am good.
I may have a few monitor sockets still left over if anyone on the project is also still interested. I'll have to see how many I have.
Re: RAM Boards
Posted: 04 Sep 2018 12:25
by troed
I would like a RAM board.
(and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Re: RAM Boards
Posted: 04 Sep 2018 12:33
by exxos
troed wrote: 04 Sep 2018 12:25
(and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Monitor sockets should be in with the kits I sent out.
Re: RAM Boards
Posted: 04 Sep 2018 12:48
by Icky
exxos wrote: 04 Sep 2018 12:33
troed wrote: 04 Sep 2018 12:25
(and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Monitor sockets should be in with the kits I sent out.
Thanks Exxos - that packing looked extreme from your pictures. Only place you can do that was the floor. You did a grand job.
I was mentioning as I wondered if anyone missed or chose not to get a kit from your store and needed a monitor socket. Based on reading the threads I lost track of how many boards there were to how many kits etc :)
Re: RAM Boards
Posted: 04 Sep 2018 12:53
by exxos
Icky wrote: 04 Sep 2018 12:48
I was mentioning as I wondered if anyone missed or chose not to get a kit from your store and needed a monitor socket. Based on reading the threads I lost track of how many boards there were to how many kits etc :)
ah, I only did 10 kits, 8 went to my store. So theres about 5 people without full kits, I didn't really expect all the kits to sell as not everyone was going to be building it up. I do still have some resistors and a few monitor sockets.. but again sorting them out even with left over bits takes time..
Re: RAM Boards
Posted: 04 Sep 2018 14:33
by Atarian Computing
rubber_jonnie wrote: 04 Sep 2018 08:31
FYI I have received two RAM boards kindly donated by Stuart Duncan from Australia.
One is populated, one is not.
I already have one myself, so these will be made available to project people who need them.
If you're part of the project, can you please add your name on here and state if you have a RAM board, so we can determine who hasn't, and then have a fair way to pass them on.
Thanks.
Hey. No Ram board here. Haven't found one yet. Thanks.
Re: RAM Boards
Posted: 04 Sep 2018 21:21
by Icky
troed wrote: 04 Sep 2018 12:25
(and a monitor socket would also be great - I have most of what's needed otherwise without needing to cut up a donor STF completely)
Troed - PM with your address and I'll send you a monitor socket.
Re: RAM Boards
Posted: 04 Sep 2018 21:27
by troed
Icky wrote: 04 Sep 2018 21:21
Troed - PM with your address and I'll send you a monitor socket.
Thanks but apparently I'm getting one in the kit from exxos :) I didn't know.