exxos's Atari, Amiga & retro forum

JezC wrote: 01 Jul 2022 17:14

rubber_jonnie wrote: 01 Jul 2022 16:33 It is entirely possible I have been labelling my plugs. You now, for reference

Did I hear someone say OCD?
:hide:

Very possibly...

Icky wrote: 01 Jul 2022 17:25

rubber_jonnie wrote: 01 Jul 2022 16:33 It is entirely possible I have been labelling my plugs. You now, for reference...

You seem to have joined the labelling club, welcome @rubber_jonnie :D

I've been a member a while, but only just come out...

rubber_jonnie wrote: 01 Jul 2022 16:33 It is entirely possible I have been labelling my plugs. You now, for reference...
PXL_20220701_153159501.jpg

Not quite the same, but it reminds me of my VGA switcher box:



Looks like I lose some points for having hand written labels though! :lol:

mrbombermillzy wrote: 02 Jul 2022 23:10

rubber_jonnie wrote: 01 Jul 2022 16:33 It is entirely possible I have been labelling my plugs. You now, for reference...
PXL_20220701_153159501.jpg

Not quite the same, but it reminds me of my VGA switcher box:


P1040369.JPG



Looks like I lose some points for having hand written labels though! :lol:

Can't beat a nice bit of labelling :D

mrbombermillzy wrote: 02 Jul 2022 23:10 Looks like I lose some points for having hand written labels though! :lol:

It's certainly better than my switcher, which has never gotten labelled, and therefore the switching technique is generally "push buttons until the right thing appears". :lol:

derkom wrote: 03 Jul 2022 07:42

mrbombermillzy wrote: 02 Jul 2022 23:10 Looks like I lose some points for having hand written labels though! :lol:

It's certainly better than my switcher, which has never gotten labelled, and therefore the switching technique is generally "push buttons until the right thing appears". :lol:

:dizzy:

derkom wrote: 03 Jul 2022 07:42

mrbombermillzy wrote: 02 Jul 2022 23:10 Looks like I lose some points for having hand written labels though! :lol:

It's certainly better than my switcher, which has never gotten labelled, and therefore the switching technique is generally "push buttons until the right thing appears". :lol:

Switcher?! I just pull cables?

stephen_usher wrote: 03 Jul 2022 09:58

derkom wrote: 03 Jul 2022 07:42

It's certainly better than my switcher, which has never gotten labelled, and therefore the switching technique is generally "push buttons until the right thing appears". :lol:

Switcher?! I just pull cables?

I do have one VGA switcher, and it is labeled, but only 2 channel.

The retro area on the other hand has a 4 channel RCA (Composite and R/L audio) switcher that I really should label :)

My HDMI switcher is automatic, so it's not labeled :)

Mmmm, that feels better:

Ok, so I'm running out of connections for stuff!!

Now I have the Xbox out in the retro area, I need 5 composite switches to feed the Retrotink, but only have a 4 port switch, so I need to have a delve around in my cables and see what I can use as an alternative, I'm sure I have a SCART or composite to HDMI which would mean I can use one of the free slots in my HDMI switcher. That'll be a tomorrow job I think as I have a wedding to go to later.

Happy to say I have a few other retro bits and bobs on the way too:


A 32K RAM expansion for the TI 99/4a:


It does come in a 3d printed case BTW.

A joystick adapter for the same:


And a Joystick adapter for the Dragon:


I have to say that the place I've been getting stuff from on eBay, 8Bit-Tronics, is great. It's been a one stop shop for some good add ons, like FinalGROM, CoCoSDC and the joystick adapters (There's stuff for other machines too), and the chap has been very communicative and helpful too. Not only that but his prices are very reasonable as well.

Web site is at: 8bit-tronics, I'd definitely recommend a look and if you don't see what you want on the eBay store, you can contact him directly to see what he can do for you.