exxos's Atari, Amiga & retro forum

@exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards

PhilC wrote: 24 Jun 2025 14:19 @exxos wasn't one of those chips you removed to do with the PCI bus as they are all PCI cards

Its a super IO, but not sure it deals with the PCI bus.

Looks like keyboard, printer, serial, floppy, its on the ISA bus, so probably just a "built on" IO card I guess.

I just tried the S3 but no output. Would have thought the card would have given sync at least. But probably can't do much else until my new chips come :(

@exxos it's probably failing to get as far as the bus initialisation because of the missing chips.

:girldance: :cheer: :girldance: :cheer:

:cheer: :cheer: :cheer:

Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

Steve

SteveBagley wrote: 24 Jun 2025 14:41 Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

cool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.php

Looks like there's updated TOS as well...

Very nice!

That screwdriver must have landed on the EEPROM in just the right way to reprogram it with the bootblock at the top and no OS!

BW

Nice!! Great work!

exxos wrote: 24 Jun 2025 14:45

SteveBagley wrote: 24 Jun 2025 14:41 Cool! BTW, there appears to be a later version of the boot block here: https://www.schwingen.org/files/milan/

cool thanks. I only got the latest one from here https://www.uweschneider.de/en/downloads.php

Looks like there's updated TOS as well...

I get a single beep but no boot up. So not sure whats going on there. Will go back to the previous flash and try again...