Page 10 of 17
Re: Cyber Legends part 2 (2023)
Posted: 05 Oct 2023 18:51
by mrbombermillzy
stephen_usher wrote: 05 Oct 2023 18:21
Unfortunately I need a SCART TV which is verified to work with the Jaguar SCART cable. Not all do.
Is it some sort of combined sync RGB output?
I can maybe bring some spare screens if need be.
Re: Cyber Legends part 2 (2023)
Posted: 05 Oct 2023 19:19
by stephen_usher
mrbombermillzy wrote: 05 Oct 2023 18:51
stephen_usher wrote: 05 Oct 2023 18:21
Unfortunately I need a SCART TV which is verified to work with the Jaguar SCART cable. Not all do.
Is it some sort of combined sync RGB output?
I can maybe bring some spare screens if need be.
I think it's the voltage on the blanking pin or the resolution selecting pin. I'm wondering if it's wired up to use the sync on those and hoping that it has enough voltage enough of the time.
Re: Cyber Legends part 2 (2023)
Posted: 05 Oct 2023 19:49
by mrbombermillzy
stephen_usher wrote: 05 Oct 2023 19:19
I think it's the voltage on the blanking pin or the resolution selecting pin. I'm wondering if it's wired up to use the sync on those and hoping that it has enough voltage enough of the time.
I see.
Actually, once I think about it, I believe I only have 2 SCART TV screens left in the house. I cant believe Ive cut back so much. :( I guess that I had to make some room for those pesky kids. :lol:
However, I also have an old 80's Radio Shack SCART to RF modulator (for worst case needs) and if I get time to wire up the Aydin Ranger RGB monitor properly, that will free up one of the TVs.
Not sure I have much time for these shinnannigans now, seeing as I will be working tomorrow and half of Saturday, but I will see what I can do.
Random request: Does anyone have a RGBHV to RGsB conversion circuit handy? (Thats a RGBHV to RGB with combined sync on green). Its a very simple circuit needed for certain monitors to work with a 5 BNC standard RGB lead. (Machines like the Sony PS2 output sync on green RGB).
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 14:48
by exxos
Was there a prize for a worst machine or something because I have a candidate if so :lol: :twisted: :twisted:
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 14:51
by PhilC
exxos wrote: 06 Oct 2023 14:48
Was there a prize for a worst machine or something because I have a candidate if so :lol: :twisted: :twisted:
Yes there is a prize for the best and the worst machines, they need to be working though :P
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 14:53
by exxos
PhilC wrote: 06 Oct 2023 14:51
Yes there is a prize for the best and the worst machines, they need to be working though :P
Dammit! Define "working" ? :lol:
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 15:08
by stephen_usher
exxos wrote: 06 Oct 2023 14:53
PhilC wrote: 06 Oct 2023 14:51
Yes there is a prize for the best and the worst machines, they need to be working though :P
Dammit! Define "working" ? :lol:
I'm guessing, getting to the desktop and being able to run a game from the floppy would count. :-)
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 15:41
by PhilC
What@stephen_usher said , no cheating mr @exxos
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 16:43
by Steve
I think I'll only be bringing my H5 & PiStorm combo & monitor. Not sure if it warrants a table of it's own or not! So if anyone else is doing PiStorm stuff... I was thinking @Badwolf if you do come, perhaps we can share a table since it'll mostly all be PiStorm related stuff? I dunno, just thinking out loud.
Re: Cyber Legends part 2 (2023)
Posted: 06 Oct 2023 16:45
by exxos
@PhilC are there any power sockets even near the stage or should I try and bring a long extension cable ?