Page 10 of 14
Re: Building a DIY large bed 3D printer
Posted: 25 Nov 2019 22:38
by exxos
:cheer: :cheer: :cheer: :cheer:
Re: Building a DIY large bed 3D printer
Posted: 26 Nov 2019 16:16
by Atarian Computing
Sweet! Well done! Sounds pretty quiet too.
Re: Building a DIY large bed 3D printer
Posted: 26 Nov 2019 16:49
by Icky
Atarian Computing wrote: 26 Nov 2019 16:16
Sweet! Well done! Sounds pretty quiet too.
Yeah its fast and quiet. I am really happy so far. As I said just need to do some tweaks and I will be ready to print off a bottom STFM prototype case, possibly in pink for a certain person ;)
Although printing something so large in one go is a challenge.
Re: Building a DIY large bed 3D printer
Posted: 13 Dec 2019 09:30
by Icky
Finally received the PEI sheet for the print bed. Hoping to do a test print this weekend of an ST Case backplane to see how the printer copes with a large length print.
Re: Building a DIY large bed 3D printer
Posted: 15 Dec 2019 16:59
by Icky
And so it starts.....
IMG_4637.jpeg
Re: Building a DIY large bed 3D printer
Posted: 15 Dec 2019 19:40
by Icky
Just waiting for the bed to cool down. This prototype first print is going to help a lot with working out a removable back panel so we can have different setups such as a VGA socket slot for the H4 for the case. Possibilities are endless such as SD or CF card slot etc.
IMG_4640.jpeg
Re: Building a DIY large bed 3D printer
Posted: 15 Dec 2019 21:02
by exxos
oooooooooooooo :)
Re: Building a DIY large bed 3D printer
Posted: 15 Dec 2019 21:04
by PhilC
Looks good from here
Re: Building a DIY large bed 3D printer
Posted: 17 Dec 2019 13:29
by Icky
I think someone is trying to bribe me into printing a pink STFM case :)
A leaded solder reel will do it :)
IMG_4648.jpeg
Re: Building a DIY large bed 3D printer
Posted: 17 Dec 2019 15:28
by exxos
My hints are subtle ;)