Page 83 of 94

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 23 Mar 2025 21:40
by PhilC
@JezC happy for you to borrow the 68010 version if you want?

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 23 Mar 2025 21:46
by PhilC
Been going through my computer collection and doing some of the assessments and repairs on the ones that have just sat in a pile since I bought them (like those 5 or was it 6 TI-99s) and have a couple of working STFMs that I want to sell on but can't remember how much I got them for and don't have a clue of their current values. Looking at eBay, one person has one for £185 which is ridiculous.

I'll probably list them on here for offers in the morning.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 23 Mar 2025 21:49
by JezC
PhilC wrote: 23 Mar 2025 21:40 @JezC happy for you to borrow the 68010 version if you want?
A very kind offer - I'd like that, thanks.

No huge rush but definitely interested to see how they run - I've got one of the Cyclone II FPGA-based boards that can run Z80, 6502 or 6809 cores to finish off (built up to a minimal working level but still to add the external SRAM etc.)

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 23 Mar 2025 22:03
by PhilC
@JezC when would you like it?

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 27 Mar 2025 16:14
by PhilC
So whilst I am still in the process of fixing my Reuters monitor, I bought another mono monitor. This time it's a Zenith data systems composite monitor and this time it still works (just jinxed it!)
PXL_20250327_160733467.MP~2.jpg
And in other news, the 68030 Rosco_m68k board is up and running. One of the bits of demo software is a text only adventure game, so I might see if I can get it coupled up to this mono monitor for a bit of retro adventuring for Cyber Legends 4.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 27 Mar 2025 16:35
by mrbombermillzy
PhilC wrote: 27 Mar 2025 16:14 One of the bits of demo software is a text only adventure game, so I might see if I can get it coupled up to this mono monitor for a bit of retro adventuring for Cyber Legends 4.
I'd like to see that Phil. Good stuff!

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 29 Mar 2025 16:44
by stephen_usher
PhilC wrote: 27 Mar 2025 16:14 So whilst I am still in the process of fixing my Reuters monitor, I bought another mono monitor. This time it's a Zenith data systems composite monitor and this time it still works (just jinxed it!)
PXL_20250327_160733467.MP~2.jpg

And in other news, the 68030 Rosco_m68k board is up and running. One of the bits of demo software is a text only adventure game, so I might see if I can get it coupled up to this mono monitor for a bit of retro adventuring for Cyber Legends 4.
Those onitors are generally bulletproof. Very little to go wrong.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 29 Mar 2025 17:17
by PhilC
stephen_usher wrote: 29 Mar 2025 16:44
Those onitors are generally bulletproof. Very little to go wrong.
That's good to know. I'll take it apart and give it a once over at some point.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 08 Apr 2025 19:33
by PhilC
Not too busy this week retrowise so far, yes I know it's only Tuesday.

I've been working on getting my SBCs up and running. The 68030 Rosco is now working well with its own SD card interface now working.

I did some more of the Uterm2 card, thinking id got everything to get that sorted but as usual, I've ran out of 74HCT08s and 1uf ceramic caps.. Annoying. I should have this running next week though. I've been building this as a self contained RS232 interface, so that I don't need fire up Minicom on the Mac each time I want to use an SBC.
17441368484046465302527875786132.jpg
In other news, I got my old PS2 off the shelf today and tried to get that to fire up. Of course I've lost the video cable and the cheap AliExpress HDMI adapter doesn't work withy monitor. It does make all the right kind of noises when connected to some speakers though, so hoping the McBazel HDMI interface from Amazon that's arriving will sort that out.

I've decided that I'm going to be putting the PlayStation band back together. I've got a PS1 on order, already have a PS2 as mentioned above, a PS4 Pro and PS5, so just a PS3 to complete the collection.

I might take a leaf out of @mrbombermillzy book and see what I can pick up at a car boot sale.

Re: PhilCs blog / the latest things hes broken(fixed)

Posted: 08 Apr 2025 20:39
by mrbombermillzy
PhilC wrote: 08 Apr 2025 19:33 I've decided that I'm going to be putting the PlayStation band back together. I've got a PS1 on order, already have a PS2 as mentioned above, a PS4 Pro and PS5, so just a PS3 to complete the collection.

I might take a leaf out of @mrbombermillzy book and see what I can pick up at a car boot sale.
If you had given me a couple of weeks, I could have filled that order for you. :lol:

Definitely the abundant consoles at a car boot ATM are PS4/XB360/XB one.

In fact, I must have seen at least 3 PS4s last Sunday (oh and I forgot to mention in my car boot thread, I spotted an Amstrad PCW machine, complete with kb, printer and Green screen monitor).

The thing with consoles at car boots, is they are more likely to be broken (i.e. red ring of death,etc), as opposed to vintage computers, which are generally found in house clearances, or taken down from the loft; hence far more likely to work to some degree and a less risky purchase.