Page 8 of 15
Re: 330 disable function bug
Posted: 06 Dec 2024 08:39
by Mister_Grave
supaduper wrote: 05 Dec 2024 15:02
Firmware has all previous fixes so it is good to go
Regarding the Switch, it is a on/on switch so it is self explanatory ,the switch will have three connectors, so middle pin ( is the Shared connecter on the switch) will go to the Bottom left pin nearest the IDE connector ( this is looking down on the TF330) the other two connectors does not matter, just put one to the bottom right pin and the other to top left pin
Just study my pictures of the jumper positions and this will give you the correct connections
Thank you very much for the explanations! the switch also disables access to the CF card?
Re: 330 disable function bug
Posted: 06 Dec 2024 08:43
by supaduper
Mister_Grave wrote: 06 Dec 2024 08:39
Thank you very much for the explanations! the switch also disables access to the CF card?
Yes, it disables the TF330 completely from the CD32
Re: 330 disable function bug
Posted: 06 Dec 2024 09:01
by Mister_Grave
Great, that seems perfect, I just wanted to be able to find the “vanilla” CD32 using a switch.
If in the future I want to move from a TF330 to a TF360, can we upgrade the card or should we buy one again?
Re: 330 disable function bug
Posted: 06 Dec 2024 10:25
by supaduper
Mister_Grave wrote: 06 Dec 2024 09:01
Great, that seems perfect, I just wanted to be able to find the “vanilla” CD32 using a switch.
If in the future I want to move from a TF330 to a TF360, can we upgrade the card or should we buy one again?
You need to buy the TF360, you cannot upgrade TF330 to TF360 it`s impossible to do
Re: 330 disable function bug
Posted: 06 Dec 2024 10:45
by Mister_Grave
supaduper wrote: 06 Dec 2024 10:25
Mister_Grave wrote: 06 Dec 2024 09:01
Great, that seems perfect, I just wanted to be able to find the “vanilla” CD32 using a switch.
If in the future I want to move from a TF330 to a TF360, can we upgrade the card or should we buy one again?
You need to buy the TF360, you cannot upgrade TF330 to TF360 it`s impossible to do
ok. The TF360 was not for sale on amigastore, I only found out about it after ordering it :-s
Re: 330 disable function bug
Posted: 06 Dec 2024 10:50
by supaduper
Mister_Grave wrote: 06 Dec 2024 10:45
supaduper wrote: 06 Dec 2024 10:25
You need to buy the TF360, you cannot upgrade TF330 to TF360 it`s impossible to do
ok. The TF360 was not for sale on amigastore, I only found out about it after ordering it :-s
The TF360 is not available through stores, only available from verified TerribleFire builders like me and a few others ;)
Re: 330 disable function bug
Posted: 06 Dec 2024 15:13
by alenppc
supaduper wrote: 06 Dec 2024 10:50
Mister_Grave wrote: 06 Dec 2024 10:45
ok. The TF360 was not for sale on amigastore, I only found out about it after ordering it :-s
The TF360 is not available through stores, only available from verified TerribleFire builders like me and a few others ;)
Indeed, for any TF boards, always check with official builders first if you want good quality and support :)
Re: 330 disable function bug
Posted: 24 Jan 2025 19:39
by Mister_Grave
I'm coming back to you because after 1 month of fun with my tf330 my deactivation switch no longer works since today 0_o
I removed the card, removed the switch, restarted, did all the tests I could, it no longer works. :-(
Re: 330 disable function bug
Posted: 25 Jan 2025 09:12
by supaduper
First off test that the jumpers are working so test the TF330 without the switch but with Jumper in both positions as shown in my pictures above to see if it works, I guess that your switch is gummy and just needs some contact cleaner,its a common fault
Re: 330 disable function bug
Posted: 25 Jan 2025 11:17
by Mister_Grave
I just took the test. The tf330 remains activated.