exxos's Atari, Amiga & retro forum

Ok, so after @Steve 's wise advice, here is the new PSU:


Now have to test it before fitting it back in the TT...

This is going to be a glorious TT by the time you're done :)

I hope so !

8-)

HigashiJun wrote: 05 Oct 2025 04:47 Yay, the new PSU has just been delivered:


PSU1.JPG


PSU2.JPG


Here are its specs:


Specs.jpg


Still hesitating though whether to replace the recapped Phihong one...

:?:

Good specs.

Where is that sold?

jwd wrote: 06 Oct 2025 16:13
Good specs.

Where is that sold?

https://www.16-32bit.eu/mste-tt-psu

And here comes today's progress:


A heatsink is fitted to the FPU (now running at 48MHz) and I also plan to install a heatsink/fan on the CPU.



Also soldered pins to the ATW800/2 USB IN port so I can have my USB ports at the back of the machine.



A nice result...



I had to trim the USB connector though.



Here's what it looks with the VME cradle in. The FPU heatsink sits below the ATW800/2 card and the USB connector doesn't interfere with anything.



And the back of the TT with the AT800/2 and its titanium made backplate.


That's all for today !

Where are the ATW800/2 boards available from out of curiosity?

@rubber_jonnie

You can get one here:

https://www.geekdot.com/buy-an-atw800-2/

I am on the list for a second one...

HigashiJun wrote: 07 Oct 2025 12:18 @rubber_jonnie

You can get one here:

https://www.geekdot.com/buy-an-atw800-2/

I am on the list for a second one...

Thanks.

;)