Page 7 of 8

Re: exxos's H5 A3 Build

Posted: 30 Oct 2020 21:49
by JezC
PhilC wrote: 30 Oct 2020 21:46 In fairness I had no idea which tune it was as the organs drove me crazy after 10 seconds.
:lol: :stars:

Re: exxos's H5 A3 Build

Posted: 30 Oct 2020 22:59
by exxos
JezC wrote: 30 Oct 2020 21:48 True...Roland's GS or the Yamaha XG are much better IMO...though I might be biased (as he looks at the array of Yamaha MU/Roland Sound Canvas synths on the desk in front of him...) :lol:
A guy I used to work with lent me his "Dr synth" years ago, he had that setup and was godlike. The midi stuff sounded like the original music it was that good.

Re: exxos's H5 A3 Build

Posted: 31 Oct 2020 11:51
by exxos
@Icky and I have noticed the MIDI Volume is a lot lower than the YM volume.. Is not overly a massive issue, but the MIDI output needs a preamp to get it up to the YM sound level. So I am in the middle of redesigning the audio circuit to do away with the single transistor amp, which really just seems to act as a buffer, for a dual op amp where I can use one amp to increase the volume of the MIDI, and then use a second amp as the main output audio driver.

The blue line is 5 kHz MIDI simulation waveform. The green is one 1Khz YM sound chip simulation waveform. The red is the combined output of both. I actually made the final lamp more of a divide by two because the combined audio input of both of them was taking it to well over one volt which would mean the sound level would be twice as loud as it is now which I think would be too much. In any case the volume level can be controlled by altering a resistor on the board so it should not be too much hassle to just do it by ear anyway.

Capture.PNG

Re: exxos's H5 A3 Build

Posted: 02 Nov 2020 11:47
by exxos
PCB designed :)

Capture.PNG

Re: exxos's H5 A3 Build

Posted: 02 Nov 2020 12:48
by Icky
Looking good @exxos.

Winamp - that brings back memories

Re: exxos's H5 A3 Build

Posted: 02 Nov 2020 15:23
by JezC
Icky wrote: 02 Nov 2020 12:48 Looking good @exxos.

Winamp - that brings back memories
I think that's what I still use to create my lossless MP3 files... ;)

Re: exxos's H5 A3 Build

Posted: 17 Nov 2020 18:16
by exxos
First tests of the X2 MIDI module.

Software
http://www.jdkoftinoff.com/main/Histori ... DI_Player/



Re: exxos's H5 A3 Build

Posted: 17 Nov 2020 18:40
by exxos
..and for those who didn't like murdered Thriller...

Granted this is a different MIDI player, but sounds a lot better with the X2 module...



Re: exxos's H5 A3 Build

Posted: 17 Nov 2020 19:00
by sporniket
nice. That will make a great music workstation.

Re: exxos's H5 A3 Build

Posted: 17 Nov 2020 19:53
by PhilC
Reminds me a bit of my 05R/W. Might have to get one after Christmas