exxos's Atari, Amiga & retro forum

8 Bit Dreams wrote: 07 Jan 2021 15:50 Thre are some discussions on A1k, people are very interested, we'll need some tweaks to get it work with D520 though cause DB23 isn't fully routed..

Which bits are missing on the DB23? it has the same pinout as the kipper2k riser just routed to the A?_EXT pins.

Very impressive work :D

If testers are needed I can try(receive a board, assembled or not) albeight I have no programming knowledge

Kai
Norway

8 Bit Dreams wrote: 07 Jan 2021 15:50 Looks nice!
is this the final version or some updates/optimisations will follow?
Thinking about to get small batch of them..
Thre are some discussions on A1k, people are very interested, we'll need some tweaks to get it work with D520 though cause DB23 isn't fully routed..

OK so this is the wrong riser for them! Like most things on a1k they miss the point of the design....

This risers video is designed to let me use FMV output on DB23. So if you want the digital outputs direct from LISA then you will not get FMV. I prefer to see my FMV output on my DB23 than have 100% perfect video.

Honestly i have no interest in what people on a1k want as they have been nothing but rude about me over the years.

What exactly is D520? All I know of is the Commodore A520.

I think they talking about this
https://d520-converter.de/produkt/d520-converter/

It is open design anyone can modify it to own needs if they wish. If signals are on edge connector then it should be easy enough.
My personal opinion on this is that I don't own this device, and I am not planning to buy one, so it is not something I am interested in supporting. I am more than happy with quality of my £5 gumtree grab TV with SCART input.

I am more than happy with quality of my £5 gumtree grab TV with SCART input.

the honest truth

I have prepared new firmware
1. non blocking keyboard routine
2. Memory setting optimization, which do help tiny little bit with performance.

https://github.com/arkadiuszmakarenko/T ... r_binaries

Will give it a go

EDIT: arkadiusz.makarenko was kind enough to answear my questions in PM so i removed them from here

Anyways, im happy to see so much effort going into this i probably spent way to much time rading thru this thread, keep up the good work!