Page 55 of 60
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 31 Dec 2020 13:23
by arkadiusz.makarenko
Ok. We still struggling with finding why mouse stutters on screen on @kulamario cd32, and it is ok on my one.
I have checked again 020 reference manual, and I changed AS20 to DS20 which happens as a last step on CPU side.
I can't replicate this issue on my CD32, even if it is exactly the same CD32 revision and very similar set up.
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 31 Dec 2020 20:31
by arkadiusz.makarenko
It most liekly was a mouse!
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 13:57
by terriblefire
arkadiusz.makarenko wrote: 30 Dec 2020 22:30
@terriblefire
Last working Rev1
I hope it will work on your CD32.
My CD32 does not boot with this. Dont even get the flashes.
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 14:27
by arkadiusz.makarenko
terriblefire wrote: 02 Jan 2021 13:57
arkadiusz.makarenko wrote: 30 Dec 2020 22:30
@terriblefire
Last working Rev1
I hope it will work on your CD32.
My CD32 does not boot with this. Dont even get the flashes.
Does LED2 turn on when you plug in the mouse?
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 14:32
by terriblefire
arkadiusz.makarenko wrote: 02 Jan 2021 14:27
terriblefire wrote: 02 Jan 2021 13:57
My CD32 does not boot with this. Dont even get the flashes.
Does LED2 turn on when you plug in the mouse?
Almost built the Rev 2. which is the best firmware for that
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 14:57
by arkadiusz.makarenko
I have doublechecked this one, and this set works for me the best at the moment.
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 15:06
by terriblefire
arkadiusz.makarenko wrote: 02 Jan 2021 14:57
I have doublechecked this one, and this set works for me the best at the moment.
ARM is running but the CD32 does not boot.. doesnt get to the CD Menu.
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 15:16
by arkadiusz.makarenko
terriblefire wrote: 02 Jan 2021 15:06
arkadiusz.makarenko wrote: 02 Jan 2021 14:57
I have doublechecked this one, and this set works for me the best at the moment.
ARM is running but the CD32 does not boot.. doesnt get to the CD Menu.
So it is black screen on start?
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 15:21
by terriblefire
arkadiusz.makarenko wrote: 02 Jan 2021 15:16
terriblefire wrote: 02 Jan 2021 15:06
ARM is running but the CD32 does not boot.. doesnt get to the CD Menu.
So it is black screen on start?
ignore me. i soldered on the bus buffer chip backwards... absolute arse to change after the DB23 is on.
working now...
Re: TF CD32 Riser Revision 2 Design Complete
Posted: 02 Jan 2021 15:33
by arkadiusz.makarenko
terriblefire wrote: 02 Jan 2021 15:21
ignore me. i soldered on the bus buffer chip backwards... absolute arse to change after the DB23 is on.
working now...
Ufff. I started nervously biting my nails :D