We welcome retro users & hardware gurus alike! Come and join the party :)
https://www.exxosforum.co.uk/forum/
Nice, G means pb free. Answers my question!! Thx a lot. @go0se @Avinitlarge !!Avinitlarge wrote: 20 Feb 2022 18:46You are Indeed correctgo0se wrote: 20 Feb 2022 18:43
Mark, is this correct? Both are the same Thin Quad Flat Pack 144 pin, as far as I am aware the G just indicates that it is certified lead free?
Happy to be shot down here!? :)
6197744E-48A1-4672-B409-61B3BD44E755.png
I cannot think of any reason why the ram and the IDE would interfere with each otherdrwhy wrote: 13 Apr 2022 15:24 ... hmm ...
does the TF1230 IDE port work with 128mb RAM ?
before I had my card builded with 64mb of RAM and ehIDE is working,
now upgraded to 128mb and the CF-card on the ehIDE.device isn't recognised anymore.
I am using FW from tf1230r1_2021_10_01_beta and AOS3.2.1
AmigaTestKit 1.18 gives me no errors on RAM test.
Works beautifully in one of my A1200!
Only for my 2 A1200 ;)terriblefire wrote: 27 Mar 2022 17:10 To be clear. You need to support the buyer if you manufacture and sell a TF1230. Legally you are the manufacturer and must give a 6 year warranty. If you do not you are in breach of the license and are breaking the law in the EU.
40c is excessive, they will get warm but should not be that hot I would put heatsink on itICRY wrote: 25 Jun 2024 21:13 Hello All,
I don't know if it's because I have fitted a 288 to a TF1230 but the CPLD gets hot approx. 40c running demos, games, but the card runs fine, so just wondering if this is a normal ish temp for the CPLD etc, or possibly something else, I can always add a heatsink tho.
If this is still a problem can you tell me how much fastram is reported? Can you softload other modules?drwhy wrote: 13 Apr 2022 15:24 ... hmm ...
does the TF1230 IDE port work with 128mb RAM ?
before I had my card builded with 64mb of RAM and ehIDE is working,
now upgraded to 128mb and the CF-card on the ehIDE.device isn't recognised anymore.
I am using FW from tf1230r1_2021_10_01_beta and AOS3.2.1
AmigaTestKit 1.18 gives me no errors on RAM test.
Hello everyone! Sorry if this is an obvious question as i'm completely new here.terriblefire wrote: 03 Aug 2021 20:05 Anyways here we are... all the TF1230 schematics, gerbers, cpl and bom files... DO NOT ASK me how you use these... if you dont know walk away..
tf1230r1_archive.zip