exxos's Atari, Amiga & retro forum

terriblefire wrote: 11 May 2023 13:11

supaduper wrote: 11 May 2023 13:09 For consistency I would stick to the seqential serial for practicality so mine would be 1001 :D

I was thinking something more childish like 68090

Actually I like it Steve, proving that us retro guys have a humour bone 8-)

terriblefire wrote: 11 May 2023 12:54 I'm hoping to do a STABLE release package for this next week.

Will it be any different to iteration 3? Flashing my 1260 with a RasperryPi is a pain in the ass with the dupont cable.

matt020 wrote: 11 May 2023 13:45

terriblefire wrote: 11 May 2023 12:54 I'm hoping to do a STABLE release package for this next week.

Will it be any different to iteration 3? Flashing my 1260 with a RasperryPi is a pain in the ass with the dupont cable.

Not planning any more changes. Just to formalize the package and put some release notes in there.

Tested today iteration 3, no issues at the moment
I'll continue testing
A1200 dev 1D.1 booting from internal IDE, 3.2.1 ROM

Thanks for the update

P.S.:
Debain 3.1r8 works
Netbsd 9.3 works

supaduper wrote: 11 May 2023 13:15

terriblefire wrote: 11 May 2023 13:11

I was thinking something more childish like 68090

Actually I like it Steve, proving that us retro guys have a humour bone 8-)

68069 :mrgreen:

Could I please confirm that the serial number for iteration 3 is 1000 again?

matt020 wrote: 12 May 2023 09:31 Could I please confirm that the serial number for iteration 3 is 1000 again?

probably is. Unless i specify the serial number when i type make its 1000.

Yes, it is 1000.

Thank you for confirming.
And thank you Stephen for the update. I know I'm not alone when I say I appreciate and admire your work. Thank you.

Flashed my TF1260 with the Raspberry method and version 3 of the firmware.
Raspberry Pi Zero 2W, was kinda slow but it worked on first try.

1D1 board with 3.2.2.1 ROMs here.
I am using internal IDE, CPU is a Rev 5.
With latest v1000 I had stable 50 and 67.
75 freezed immediately, 80 sometimes worked sometimes freezed immediately.
All between freezes and above 80 I never tried - I only have a cooler with a 12V fan so I am not sure it will be safe enough.

Currently testing some demos @ 66.65 (67 setting).

• 50 is stable as ever
• 58,33 (59) freezes immediately after opening a window
• 60 (61) same...
• 62,5 (63) same...
• 66,65 (67) stable as before (currently running Quake demo)
• 75 (75) freezes...
• 80 (80) freezes...

Aardvark82 wrote: 08 May 2023 13:05 I tested every game and demo which I had experienced issues with previous FW, and they all work flawlessly now.

Which games and demos did you have problems with?