Page 46 of 51
Re: TF1230 Beta Interest (Open Source)
Posted: 04 Oct 2021 23:46
by culexus
Thank you supaduper :) I understand allot more after reading your perfect guide. Now I have something to do the next week.
Soldering is easy but the the software stuff and how it works on the amiga side is not my strongest thing.
Re: TF1230 Beta Interest (Open Source)
Posted: 05 Oct 2021 22:53
by ICRY
Thank you superduper for a great guide, just trying to do a custom 3.1 build in winuae & I run out of space for ehide.device
3.1custom.jpg
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 06:41
by supaduper
That guide is for rom 3.2, if you are doing a custom 3.1 then I do mention that you `REMOVE` the Workbench.library from the build List, make sure that you then manually replace the Workbench.library back into Libs on the System disk otherwise it will not work
Download Workbench Library here:
http://www.amigaforever.com/classic/download/
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 09:47
by dragmar
I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip
I tested WHDLOAD games
Tested by internal IDE 1200 and works fine.
I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.
Someone can check it if this is the case.
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 09:50
by terriblefire
dragmar wrote: 06 Oct 2021 09:47
I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.
Someone can check it if this is the case.
Which games. We need a little more information. Also try the later beta.
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 09:52
by dragmar
OS32, WHDLOAD 18.5
lure of the temptress, ishar
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 14:50
by markus0321
dragmar wrote: 06 Oct 2021 09:47
I soldered to my Amiga rev. 2B TF1230.
CPLD144-10ns, RAM MT48LC16M16A2P-6A, Digital bus switch SN74CB3Q3245PWR, i.e. the systems I used in TF536.
Programmed CPLD -
tf1230r1_2021_09_14_RC1.zip
I tested WHDLOAD games
Tested by internal IDE 1200 and works fine.
I tested EHIDE.DEVICE driver and IDE controller on TF and whdload does not work properly.
He's not fully uploading the game, they're going through the intro and still don't want to upload.
It happens that during the game he has to play something and he does not do it.
Someone can check it if this is the case.
Try to run MuFastROM from the MMU_libs package from aminet before loading the game. For me, when I run FastROM, the problems with ehide disappear, if I leave it in the ROM memory, it is unstable.
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 15:31
by AndreaM
I have a similar problem with WHDload 18.5 & Dragon Tiles AGA on my TF1260 and the original firmware. Everything else works really well
ehide.device loaded at the beginning of startup-sequence, MuFastROM called from user-startup. I didn't really investigate since the DoM I use won't fit under my keyboard, just went back to the internal IDE and enjoying the rest of the card. :)
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 21:17
by Avinitlarge
Which are the best ram chips to use for 128mb? I’ve seen a few different ones mentioned.
Re: TF1230 Beta Interest (Open Source)
Posted: 06 Oct 2021 21:44
by 8 Bit Dreams
terriblefire wrote: 30 Sep 2021 09:00
<Snip>
Issi "IS42S16320F-7TL" for 128MB: Everything works perfect in all circumstances without errors in WHDLoad.
<Snip>