Page 5 of 7
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 10 Jan 2026 23:31
by stephen_usher
:dualthumbup: :cheer:
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 11 Jan 2026 01:44
by HigashiJun
It could have been worse...
Glad you managed to fix the issue.
8-)
Re: SpeedyTT, black screen of death !!!! (SOLVED)
Posted: 18 Jan 2026 01:56
by zfrenchy
final and summarized post:
Bad soldering joint on the IC sockets
ZuluSCSI-RP2040 is blocking the booting sequence after the RAM test when the SpeedyTT is in 48Mhz mode.
Re: SpeedyTT, black screen of death !!!! (SOLVED)
Posted: 18 Jan 2026 05:34
by HigashiJun
zfrenchy wrote: 18 Jan 2026 01:56
final and summarized post:
Bad soldering joint on the IC sockets
ZuluSCSI-RP2040 is blocking the booting sequence after the RAM test when the SpeedyTT is in 48Mhz mode.
:dizzy:
I'm afraid I don't understand you...
So does your Speedy work fine after all your fixes ?
What other expansions have you fitted in your TT ?
Do everything just work as it should without your SCSI interface ?
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 05:38
by zfrenchy
Yes, everything work without the ZuluSCSI installed
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 06:00
by HigashiJun
And don't you have an IDE drive (provided you got a Thunder IDE from the ThunderStorm team) ?
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 06:02
by zfrenchy
Yes I have it, not installed yet.
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 06:06
by HigashiJun
Then fit it and check if IDE works.
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 12:38
by Steve
FYI that's most likely a software issue (zulu not working) I have TT, Speedy, both my IDE and SCSI work fine (I use a Bluescsi)
Re: SpeedyTT, black screen of death !!!! HELP
Posted: 18 Jan 2026 23:53
by HigashiJun
Steve wrote: 18 Jan 2026 12:38
I have TT, Speedy, both my IDE and SCSI work fine (I use a Bluescsi)
Same here.