Page 5 of 5
Re: Atari + gotek + MAPROM floppy corruption
Posted: 16 Jul 2020 22:18
by exxos
Ah there we go :thumbup: , running them twice from AUTO has made GB6 happy, it now finds and runs in alt-ram!
So here are the updated results..

- IMG_5414.JPG (102.77 KiB) Viewed 2348 times
I've dumped my .ST image here while its working :lol:
So it runs FASTRAM.PRG then TTRAMTOS from AUTO.. Resets... Loads again (but second run of TTRAMTOS doesn't load the IMG or causes reset now) then I have BLITFIX.PRG on AUTO in NEWDESK.INF.
:dizzy: :thanksyellow: :girldance:
Re: Atari + gotek + MAPROM floppy corruption
Posted: 16 Jul 2020 22:33
by exxos
With caches off..
But with ROM access so fast, the scores should be wayyyy higher... :shrug:

- IMG_5415.JPG (106.91 KiB) Viewed 2344 times
This is my 32MHz booster, no alt-ram.. So the 030 should be more like double all those scores at 50Mhz.

- ste32mhz.jpg (149.69 KiB) Viewed 2343 times
Re: Atari + gotek + MAPROM floppy corruption
Posted: 16 Jul 2020 23:34
by agranlund
This is my 534.
Granted, it's comparing against a stock ST because that's where I started and I'm interested in my score against that.
It's also running NVDI. I'll try without NVDI tomorrow and see what that shows.
I think this is EmuTOS. TOS206 is slightly faster at some tests and slightly slower at others but average is >1000% on both :)
TOS is doing a lot of ST-RAM access drawing so NVDI and fastram is a very good match.
And in your case without maprom all of TOS internal variables are in ST-RAM as well which isn't going to help.
Edit: I am curious about some of these faster results on the 32Mhz booster though, is the ST bus also boosted or is it still running at 8Mhz?

- Screenshot 2020-07-17 at 00.27.13.png (664.31 KiB) Viewed 2336 times