exxos's Atari, Amiga & retro forum

set bitrate 38400
save
reset

I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin Then After reset is still freeze CMD>reset

kulamario wrote: 17 Apr 2020 17:16 I waiting maybe few minutes with
CMD>reset
Then I get info
Connection closed by foreign host.
So I write agin

Code: Select all

telnet 192.168.240.1 7777

Then

Code: Select all

set bitrate 38400

Code: Select all

save

Code: Select all

reset

After reset is still freeze CMD>reset

You are all set. Plug it into the amiga and use my script.

This script how to start ?
Just double click and then enter , enter ... ?

kulamario wrote: 17 Apr 2020 17:18 This script how to start ?
Just double click and then enter , enter ... ?

type execute install_script

Check that the version is the one with the baud rate of 38400.. the one i posted on this forum has that baud rate.

Just power off and on the ESP after reset. Should make it work.

How to check this ?

Check that the version is the one with the baud rate of 38400.. 

I disconnect esp8266 from laptop and connect to amiga
Install your script

I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off

kulamario wrote: 17 Apr 2020 17:45 How to check this ?

Check that the version is the one with the baud rate of 38400.. 

I disconnect esp8266 from laptop and connect to amiga
Install your script

I try to open site in AmiiFTP and nothing happened
How should be Led on esp8266?
My just light up for 2sec and then turn off

start with ping 192.168.240.1 at a cli after a reboot.

No working

kulamario wrote: 17 Apr 2020 18:03No working

Have you tested your hardware?