exxos's Atari, Amiga & retro forum

Hi, just received the MKVI from exxos, the little push button switch broke off, what kind of switch (part number) is it? I see its a 2-pole, is it a momentary contact or latching switch? Can I use the external switch pads to solder another switch onto it? Thanks!

Hm. It’s K2-1823SA. But that shouldn’t happen. Check your inbox. :)

Hi,
Can you let me know when these will be available to purchase from your store please?
Thanks

Gbrigden wrote: 28 Oct 2020 13:22 Can you let me know when these will be available to purchase from your store please?

You need to keep a eye on this topic https://www.exxosforum.co.uk/forum/viewt ... =90&t=2144

Hello @all, I PM Ube for the same thing, my adapters provide to me lots of vertical band, i cleaned all, adjusted the trimpot for the best but still vertical bands.
Any advice (Monitor is a dell 1411U 15kHz compatible and a standard RGB cable of 50cm) ?

Thoe worst picture is on my Mste, the best on the 1040 STF, might thing about PSU/caps ?
Thxs a lot.

The adapters don't really do much in terms of video. Mostly its down to just old machines and problems with the scaling on the monitor etc. I know there's been several threads about this problem on the forum already if you have a look around.

I’ll drop it here as well. It’s a monitor clock thingy.

http://www.techmind.org/lcd/phasexplan.html

exxos wrote: 21 Nov 2021 18:30 The adapters don't really do much in terms of video. Mostly its down to just old machines and problems with the scaling on the monitor etc. I know there's been several threads about this problem on the forum already if you have a look around.

Yeah, i did read some of them.
The vertical lines are visible with clear colors, look like 'vertical' noise. I will make pictures sometime.
Thxs