exxos wrote: 11 Apr 2021 23:27
Holy heck.. EMUTOS is fast on a 030! I swear the floppy is going faster as well...
Woof!
BW
Re: REV 3 - The beginning
Posted: 12 Apr 2021 15:40
by exxos
I have been playing around with MAPROM this morning trying to get the " copy low RAM variables to fast ram" working,but basically no luck.
Just for comparison, this screenshot is from before of TOS206 running in fast ram only..
IMG_6403.JPG
Then running MAPROM which is actually running slower for some bizarre reason... I can only assume it is something to do with the MMU look-up tables which is causing this slowdown.
IMG_6410.JPG
Re: REV 3 - The beginning
Posted: 12 Apr 2021 16:22
by exxos
Your sacrifice is not in vain..
IMG_6412.JPG
Let's see if the printer behaves today for once..
IMG_6413.JPG
Re: REV 3 - The beginning
Posted: 12 Apr 2021 18:07
by exxos
Each having trouble with the nozzles :( all the ones I have are blocked up and they are currently in your ultrasonic cleaner :roll:
But I have got these new red nozzles.. Problem is these ones are too big for the pads which I am trying to print.. So been fiddling for the past couple of hours to get the pressure just enough to get the paste flowing, and fast enough to get a thin spread of paste on the pad.
The slightly larger pads I am drawing a circle basically on them to get more paste down.
IMG_6414.JPG
Re: REV 3 - The beginning
Posted: 13 Apr 2021 14:12
by BlankVector
terriblefire wrote: 12 Apr 2021 09:22I keep telling people to use EmuTOS but they want the nicer icons of 2.06. :) Which i asked you to put in EmuTOS like back in 2012 :P
For completeness, EmuTOS 1.0 has nicer icons. And it has been possible to change them with an RSC file for a long time.
Re: REV 3 - The beginning
Posted: 13 Apr 2021 14:39
by terriblefire
BlankVector wrote: 13 Apr 2021 14:12
For completeness, EmuTOS 1.0 has nicer icons. And it has been possible to change them with an RSC file for a long time.
That requires the ability to use these tools ... i did give it a go but got very lost.
Re: REV 3 - The beginning
Posted: 14 Apr 2021 09:11
by exxos
The project got stalled again :( the 144xl chips i have are the 80io version :roll: I've done an order to mouser but no idea when the stuff will turn up.
Re: REV 3 - The beginning
Posted: 15 Apr 2021 10:04
by Badwolf
exxos wrote: 14 Apr 2021 09:11
The project got stalled again :( the 144xl chips i have are the 80io version :roll: I've done an order to mouser but no idea when the stuff will turn up.
Doh!
I'm taking an enforced break from mine waiting for some CPLDs too. Doing some 68k in the mean time.
I'm too cool to simply order the wrong ones, though. I mysteriously blow mine up just as they start working! :mad:
BW
Re: REV 3 - The beginning
Posted: 15 Apr 2021 10:17
by exxos
Badwolf wrote: 15 Apr 2021 10:04
I'm too cool to simply order the wrong ones, though. I mysteriously blow mine up just as they start working!