exxos's Atari, Amiga & retro forum

stephen_usher wrote: 06 Jul 2023 19:45 You can download the CD image here: http://www.lingula.org.uk/~steve/share/ ... 96_SSW.zip

The ".toast" file is effectively the same as a .iso file. Apparently you can just rename it and it'll work. Well, that's what the Internet says anyway. Even modern macOS understands what it is (CD image created from the Toast program) so does the right thing automatically.

Tomswork wrote: 07 Jul 2023 14:10 @rubber_jonnie

The memory expansion card and simms made in Australia i have had trouble with the simms and sockets from 30 35 years of heat cycling becoming deformed. I actually found the problem when I used two of the exxos 2 part 1meg simms and the symptoms changed

Tom

stephen_usher wrote: 07 Jul 2023 14:42 It could will be the SIMMs, or the sockets. More likely one of the SIMMs though.

olivier.jan wrote: 07 Jul 2023 15:48 Hi, Sorry if this seems obvious, but did you inspect the SIMM Sockets ? I had a similar issue with an SE/30 recently:
I fully recapped Analog and MB, added new SIMMs to push it to a whopping 32MB, replaced the CRT which had some burn in, added a FD which was missing and replaced the dead HD with a BlueSCSI.
After all the repair, I spent a few days installing OS and Software with the machine still open on my desk, and when I finally finished, I installed the back cover and screwed it properly only to be greeted by black and white strips when turning on the Mac :headbang:
I opened it again, inspected every solder joint, some traces I had to repair due to capacitor leakage and continuity tested all the capacitor I had replaced. I turned it on and it started without issue... You can imagine, what happened after I put back the back cover again.
It finally ended up being a very small bit of plastic missing from one of the SIMM socket, it was not obvious at first inspection but the SIMM was not maintained properly and able to move just a little bit, but enough to cause issues.

It' now fixed and the SE/30 is now sitting next to my synths as the perfect old school daw. Ok I know, an Atari would have been better, but the footprint of the SE/30 is so much better for a cranked space than a MSTE...So sad Atari never produced an All in One with a footprint similar to Classic Macs.

rubber_jonnie wrote: 07 Jul 2023 16:31
With regards to the BlueSCSI, might I ask how yours is configured? I have 2 that were picked up by my Archimedes A5000, but only one is visible on the Mac (I have a single drive image set as ID 0 on Lun 0.

Even when it picks up the drive, I can't initialise it, and when I try to test, it says it can't be written too. Did you have to do anything specific to make it behave? Incidentally, the BlueSCSI log file does show the drive as being detected and that BlueSCSI is going into it's main loop, and they can be formatted to and used on the Archimedes.

BlueSCSI <-> SD - https://github.com/erichelgeson/BlueSCSI
VER: 1.1-20221203-USB
DEBUG:0 SDFAT_FILE_TYPE:3
SdFat version: 2.2.0
Sd Format: exFAT
SPI speed: 50Mhz
SdFat Max FileName Length: 64
Initialized SD Card - let's go!
Sd MID:3 OID:SD
Sd Name:SC16G
Sd Date:4/2021
Sd Serial:3777069398
 - HD00_512 System 755.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
 - HD10_512 system 7.0.1.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._LOG.txt
 - HD40_512 Music.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._HD50_512 Apps.hda.img
 - HD50_512 Apps.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._HD10_512 system 7.0.1.hda.img
ID:LUN0:
 0: 512:
 1: 512:
 2:----:
 3:----:
 4: 512:
 5: 512:
 6:----:
Finished initialization of SCSI Devices - Entering main loop.

olivier.jan wrote: 07 Jul 2023 17:58

rubber_jonnie wrote: 07 Jul 2023 16:31
With regards to the BlueSCSI, might I ask how yours is configured? I have 2 that were picked up by my Archimedes A5000, but only one is visible on the Mac (I have a single drive image set as ID 0 on Lun 0.

Even when it picks up the drive, I can't initialise it, and when I try to test, it says it can't be written too. Did you have to do anything specific to make it behave? Incidentally, the BlueSCSI log file does show the drive as being detected and that BlueSCSI is going into it's main loop, and they can be formatted to and used on the Archimedes.

Just for reference: my BlueSCSI is an external DB25 version 1.1.
Here is its content :
Screenshot 2023-07-07 at 18.46.53.png


And here is the last log:

Code: Select all

BlueSCSI <-> SD - https://github.com/erichelgeson/BlueSCSI
VER: 1.1-20221203-USB
DEBUG:0 SDFAT_FILE_TYPE:3
SdFat version: 2.2.0
Sd Format: exFAT
SPI speed: 50Mhz
SdFat Max FileName Length: 64
Initialized SD Card - let's go!
Sd MID:3 OID:SD
Sd Name:SC16G
Sd Date:4/2021
Sd Serial:3777069398
 - HD00_512 System 755.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
 - HD10_512 system 7.0.1.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._LOG.txt
 - HD40_512 Music.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._HD50_512 Apps.hda.img
 - HD50_512 Apps.hda.img HDD / 2097217536bytes / 2048064KiB / 2000MiB
Not an image: ._HD10_512 system 7.0.1.hda.img
ID:LUN0:
 0: 512:
 1: 512:
 2:----:
 3:----:
 4: 512:
 5: 512:
 6:----:
Finished initialization of SCSI Devices - Entering main loop.

I have 2 system disk, one with 7.0.1 and one with 7.5.5 and two other disks containing software to install.
I did most of the system setup using Basilisk II on my Macbook as it's so much faster than doing it on the real machine and by saving regulars copies of your disk image, if you screw up the system you can come back to a known good state.

Which software do you use to initialize the drive on the Mac ? I remember I had to use some patched version of HD Setup as the original one is picky on the drive names, if you present a drive which is not a standard model shipped by Apple back in the day it will simply refuse to initialize it.

Also, do you have an image of the ALSR CD from Apple ? It contains all System Software versions and most of the software and patches released by Apple from System 1 to 9.