Page 24 of 51

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 13:32
by kulamario
terriblefire wrote: 10 Sep 2021 12:43 This fw now works on the problematic boards... Try it out people and i'll then start making it faster again.

tf1230r1_main_top.zip
At this moment I checked the card on the 1D4 board

20210910_130947.jpg

Amiga show kickstart 3.1

20210910_132135.jpg

ATK from Gotek has read but is still 66mb

20210910_130937.jpg

but from the disk it is not able to read and stops after a while

20210910_131614.jpg

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 13:36
by kulamario
supaduper wrote: 10 Sep 2021 13:19 Just to add Steve, it goes straight to a Blank Screen no IDE activity at all fella ..sorry

But lets also wait for other testers :)
I have black screen as well amiga not start like usually like you usually see reset and light black screen
And I waiting I think longer like usually for show kickstart and start reading from gotek

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 14:07
by terriblefire
The TF1230 is only 64Mb right now. Until i solve the other issues I do not plan to change that.

(Oh i see... let me see if i can figure out why that is happening)

Also I have found that some CF cards are unhappy when accessed at 7Mb/s speeds.

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 14:26
by kulamario
terriblefire wrote: 10 Sep 2021 14:07 Also I have found that some CF cards are unhappy when accessed at 7Mb/s speeds.
On this card is same behaviour

16312803724088189972718526703432.jpg

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 14:35
by terriblefire
Update for the RAM issue...

<deleted>

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 15:00
by alenppc
terriblefire wrote: 10 Sep 2021 14:35 Update for the RAM issue...

tf1230r1_main_top.zip
An improvement. No more yellow screen for me with this one. It starts booting, but it freezes shortly after.

EDIT: no issues booting from floppy it seems. It's only booting from CF that freezes it, after it loads the first few commands.

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 15:06
by supaduper
No Boot black screen :(

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 15:09
by kulamario
terriblefire wrote: 10 Sep 2021 14:35 Update for the RAM issue...

tf1230r1_main_top.zip
Memory is fixed
64mb Fast Ram
Still no boot

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 17:15
by arkadiusz.makarenko
I have check last firmware on my 3.0 (non working at all before) and 3.1 kick (working before)
3.0 - Boots to ATK via floppy - no FAST RAM detected (expected if FASTRAM is organized like in TF1260), crashes on IDE activity
3.1 - Boot to ATK via floppy - FASTRAM detected correctly, crashes on IDE activity.

Re: TF1230 Beta Interest (Open Source)

Posted: 10 Sep 2021 17:26
by terriblefire
OS 3.0 will not detect memory at 0x8000000. This was added in OS3.1