exxos's Atari, Amiga & retro forum

have memory as the 1260 have nothing to do with PCMCIA. works fine with TF.

but it will however mean that Kickstart 3.0 will not autodetect the ram.
but who uses 3.0 anyway? it is a pile of poo..

Yeah, PCMCIA works fine with the TF1260. No one uses KS3.0 these days, it's so easy and cheap to upgrade to 3.1 too.

terriblefire wrote: 05 Sep 2021 18:34 Should be working already?

I'll be honest I did not check pcmcia but tonight when I back from work I do

terriblefire wrote: 05 Sep 2021 09:57 ..I’m planning to remove autoconfig completely and put the ram
At 08000000. So same as TF1260

Because of the mediator... I see..
Ok, that makes sense 👍

Today I was able to check pcmcia
Everything works correctly

Well well well...

After a bit of a chase with the TF1260 new new firmware i have discovered something interesting. I need some time to come up with the absolute proof of this but ...

Initial hypothesis is that the Rev2B vs Rev 1D4 (et al) do autovectors differently. Not sure *HOW* this happens but I can see that interrupts are processed by an AVEC on the Rev2B and VIA DSACK on the 1D4. Since the autovector is pulled out of ROM with DSACK processing this explains why ROM speed makes a difference.

This fw now works on the problematic boards... Try it out people and i'll then start making it faster again.

Flashed the firmware Steve but computer says No :(. it does not work on my 1D4 or my 2B A1200

interesting.. ok back to the drawing board.

Just to add Steve, it goes straight to a Blank Screen no IDE activity at all fella ..sorry

But let's also wait for other testers :)