Page 23 of 37
Re: TF536 + 68000 relocator and ROM board project.
Posted: 05 Nov 2020 20:23
by stephen_usher
Those turned header pins are impossible to desolder. The Hakko fails due to the solder between the shoulder and the pad on the opposite side of the board and hot air, even with Kapton tape, melts the plastic before the solder releases its grip.
In desparation I was trying to recover the other header pin strip from the Mk.I board and ended with most of the pins still thoroughly welded to the PCB and a melted mess.
Let's hope that Royal Mail (Deuche Poste) actually get around to delivering the packages Exxos sent at the beginning of the week tomorrow. I'm completely stuck now.
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:04
by stephen_usher
Well, it's gone past the usual time the signed-for postie turns up and still no packages from @exxos. *sigh*
How long should I wait until raising the alarm about lost packages?
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:06
by exxos
stephen_usher wrote: 06 Nov 2020 15:04
Well, it's gone past the usual time the signed-for postie turns up and still no packages from @exxos. *sigh*
How long should I wait until raising the alarm about lost packages?
Whats your order number ?
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:12
by stephen_usher
Just a mo... postie spotted... hopefully not a false alarm...
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:14
by stephen_usher
Nope. Normal postie.
The two orders are:
- D57E7723EECF3566E3501EE1960F9DE5 (WM598097469GB) - Posted Monday
- 7320337105FC7111CA310345E227F878 (WM598097490GB) - Posted Tuesday
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:26
by exxos
Must be a delay somewhere as would be unlikely 2 packages would go missing.
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 15:46
by exxos
@stephen_usher There was another couple of orders to Oxford which got there in 2-4 days... It might be worth ringing up your local post office to see if they have the packages because sometimes they don't simply leave cards..
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 16:42
by stephen_usher
OK, I'll do that in the morning.
Previously orders from you have arrived next day without issue.
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 17:00
by exxos
stephen_usher wrote: 06 Nov 2020 16:42
Previously orders from you have arrived next day without issue.
Dawn was saying your other orders went to a uni address, your last ones going to I assume home address. Though with covid and lockdowns and near xmas, the post is going to grind to a halt anyway soon :(
Re: TF536 + 68000 relocator and ROM board project.
Posted: 06 Nov 2020 17:03
by stephen_usher
exxos wrote: 06 Nov 2020 17:00
stephen_usher wrote: 06 Nov 2020 16:42
Previously orders from you have arrived next day without issue.
Dawn was saying your other orders went to a uni address, your last ones going to I assume home address. Though with covid and lockdowns and near xmas, the post is going to grind to a halt anyway soon :(
Yeah. Though my RS Components order, which was shipped on Monday (again by Royal Mail), arrived on Tuesday without delay. Northampton's not that far from Derby in the grand scheme of things. :-)