Page 217 of 336
Re: exxos blog - random goings on
Posted: 24 Oct 2022 22:43
by exxos
Found this image of a "back to the future" display board I designed for someone years ago.
DSCF0005.JPG
DSCF0004.JPG
Re: exxos blog - random goings on
Posted: 24 Oct 2022 22:51
by exxos
Might as well throw in some solid state tesla coil driver boards I designed and built..
DDSSTCMK6.JPG
driver.jpg
mk2control.jpg
mk4driver.jpg
Re: exxos blog - random goings on
Posted: 24 Oct 2022 23:04
by exxos
This is how proper power supplies are built :lol:
Mains resonance charging 8-)
60ufcaps.jpg
new-pri-con1.jpg
rebuild.jpg
Forgot I built this adjustable phase rotary spark gap.
P291213_12.38_[01].jpg
P291213_12.52.jpg
P291213_12.53.jpg
Re: exxos blog - random goings on
Posted: 25 Oct 2022 13:31
by rubber_jonnie
Just arrived:
PXL_20221025_122619351.jpg
I know it's not quite as exciting as the
@exxos method, but I like my face, limbs and body the way they are :)
Re: exxos blog - random goings on
Posted: 25 Oct 2022 13:35
by exxos
rubber_jonnie wrote: 25 Oct 2022 13:31
Just arrived:
I know it's not quite as exciting as the @exxos method, but I like my face, limbs and body the way they are :)
Well you're no fun then :lol:
My piston is a bit rubbish. Each time I get up it like jams and then shots up with a thud. The old one did that but some 3in1 oil fixed it. But this one I gave up and just let it down as far as it would go , so it doesn't move now. Pretty rubbish piston :(
Re: exxos blog - random goings on
Posted: 25 Oct 2022 13:39
by rubber_jonnie
exxos wrote: 25 Oct 2022 13:35
rubber_jonnie wrote: 25 Oct 2022 13:31
Just arrived:
I know it's not quite as exciting as the @exxos method, but I like my face, limbs and body the way they are :)
Well you're no fun then :lol:
My piston is a bit rubbish. Each time I get up it like jams and then shots up with a thud. The old one did that but some 3in1 oil fixed it. But this one I gave up and just let it down as far as it would go , so it doesn't move now. Pretty rubbish piston :(
Is that the one in the video with the melted button on top? I'm surprised it hasn't fired you into the ceiling!!
Re: exxos blog - random goings on
Posted: 25 Oct 2022 13:48
by exxos
rubber_jonnie wrote: 25 Oct 2022 13:39
Is that the one in the video with the melted button on top? I'm surprised it hasn't fired you into the ceiling!!
That was the old one when I was trying to get the broken metal bit off the end!
Got my 7" one from evilbay. Garbage things
https://www.ebay.co.uk/itm/323014138309 ... 2149460420
Re: exxos blog - random goings on
Posted: 25 Oct 2022 13:52
by rubber_jonnie
exxos wrote: 25 Oct 2022 13:48
rubber_jonnie wrote: 25 Oct 2022 13:39
Is that the one in the video with the melted button on top? I'm surprised it hasn't fired you into the ceiling!!
That was the old one when I was trying to get the broken metal bit off the end!
Got my 7" one from evilbay. Garbage things
https://www.ebay.co.uk/itm/323014138309 ... 2149460420
Righto.
Got mine from Amazon, need to get it done soon, my chair is dropping at the rate of 1" per hour or faster!!
Re: exxos blog - random goings on
Posted: 25 Oct 2022 16:06
by exxos
Onto the STE booster spacers.
IMG_0111.JPG
Re: exxos blog - random goings on
Posted: 25 Oct 2022 16:43
by dml
tesla supply looks properly scary