Page 209 of 216

Re: Stuff and Things.

Posted: 20 Aug 2026 13:08
by rubber_jonnie
HigashiJun wrote: 20 Aug 2026 12:26 Love it !

You're really busy everyday.

:D
I try to fit things in around works since I work from home :)

One more CPLD soldered on, should have all of them on the PCBs by the end of the day, though I can't finish any more until my parts orders arrive. I can get partial builds done though.

Need to get some more of the PCB built for the Atom and I do have parts for that.

Re: Stuff and Things.

Posted: 23 Aug 2026 10:26
by rubber_jonnie
So I ran out of parts for the standard RGB2HDMI builds and decided to crack on with the Atom RGB2HDMI build.

It's coming along nicely:

PXL_20260823_090757606.jpg
PXL_20260823_090757606.jpg (181.47 KiB) Viewed 97 times

But now I'm in the same position with that...

More parts on order, hopefully I'll be able to get them all finished before I go on holiday to France in a couple of weeks.

More as and when parts arrive :)

Re: Stuff and Things.

Posted: 24 Aug 2026 11:37
by rubber_jonnie
OK, so parts arrived for the RGB2HDMI boards:

PXL_20260824_092313779.jpg
PXL_20260824_092313779.jpg (202.89 KiB) Viewed 87 times

So that means the 3 remaining boards will be completed today, leaving just the 40 pin connectors for the RPi which are the last part required, fingers crossed they'll come before I go away for the weekend.

Once they are all built I'll do a bulk test to be sure they all work as expected.

No parts for the Atom2HDMI board as yet, but they are all on order. I still have the Atom Colour board as well.

I also put a sneaky low bid in on this:

Screenshot 2026-08-24 at 11.26.28.png
Screenshot 2026-08-24 at 11.26.28.png (907.29 KiB) Viewed 87 times

And I won. I don't know if it'll be repairable, but I'm going to give it a go and I do have another that works for reference when I get onto fixing it.

Re: Stuff and Things.

Posted: 24 Aug 2026 11:40
by stephen_usher
:dualthumbup:

Re: Stuff and Things.

Posted: 24 Aug 2026 13:53
by rubber_jonnie
As luck would have it, I realised I had some of the missing caps for the Atom2HDMI board, so they were populated over lunch, and I finished the last 3 RGB2HDMI boards too, bar the RPi connector.

Not much left to do on these boards now, looking forwards to getting them finished :)

Re: Stuff and Things.

Posted: 25 Aug 2026 16:10
by rubber_jonnie
OK, I finally did something with KiCad...

Screenshot 2026-08-25 at 15.55.48.png
Screenshot 2026-08-25 at 15.55.48.png (69.38 KiB) Viewed 66 times

A small beginning but it did teach me a lot. Might drop the gerbers into PCBWay or JLCPCB to see what comes back :)

Re: Stuff and Things.

Posted: 25 Aug 2026 16:36
by PhilC
Is that a composite mod by any chance?

Re: Stuff and Things.

Posted: 25 Aug 2026 16:39
by rubber_jonnie
PhilC wrote: 25 Aug 2026 16:36 Is that a composite mod by any chance?
It most certainly is :)

Decided it would be good to have a go at KiCad and this seemed like a good place to start. I also got fed up of building then on Veroboard :)

Re: Stuff and Things.

Posted: 25 Aug 2026 16:44
by PhilC
Looks good to me Jon. Could obviously be made smaller if needed but great first try.

Re: Stuff and Things.

Posted: 25 Aug 2026 16:51
by rubber_jonnie
PhilC wrote: 25 Aug 2026 16:44 Looks good to me Jon. Could obviously be made smaller if needed but great first try.
Thanks.

That's not the actual size BTW, just a screengrab of the 3d viewer. Actual size is 19.5mm x 15mm, transistor is SOT23 and resistors are 0805.