Page 21 of 26

Re: TF536 on the ST

Posted: 13 Aug 2020 08:53
by PhilC
@terriblefire i tbought that might be the case. Ill disable them and see how things go.

Re: TF536 on the ST

Posted: 13 Aug 2020 09:06
by Umberto1st
I have been using Exxos V7 HD upgrade without any problems. I have even removed it to test the dma and found no difference. I would pull the hd upgrade and install a stock 68000 and retest. The HD upgrade has actually improved floppy reliability due to the 10k pull ups

Re: TF536 on the ST

Posted: 13 Aug 2020 09:16
by PhilC
@Umberto1st that's how I tested the floppy worked. Will pop the pullups onto a wd1772 and try with DD and the TF536

Re: TF536 on the ST

Posted: 13 Aug 2020 09:19
by Umberto1st
PhilC wrote: 13 Aug 2020 09:16 @Umberto1st that's how I tested the floppy worked. Will pop the pullups onto a wd1772 and try with DD and the TF536
I also did this fix for good measure

https://www.exxosforum.co.uk/forum/viewt ... =17&t=1395

Re: TF536 on the ST

Posted: 13 Aug 2020 09:21
by terriblefire
Guys, I would park this for the time being. I have no time to investigate at the moment

Re: TF536 on the ST

Posted: 13 Aug 2020 09:27
by Umberto1st
Appreciate all the help, do what you need to do my friend, like I said I'm supposed to be working on a Falcon

Re: TF536 on the ST

Posted: 13 Aug 2020 09:40
by Umberto1st
PhilC wrote: 13 Aug 2020 09:16 @Umberto1st that's how I tested the floppy worked. Will pop the pullups onto a wd1772 and try with DD and the TF536
One other thing I have done on the V7 HD upgrade, is I am using a AJAX FDC

Re: TF536 on the ST

Posted: 13 Aug 2020 10:19
by PhilC
Umberto1st wrote: 13 Aug 2020 09:40
PhilC wrote: 13 Aug 2020 09:16 @Umberto1st that's how I tested the floppy worked. Will pop the pullups onto a wd1772 and try with DD and the TF536
One other thing I have done on the V7 HD upgrade, is I am using a AJAX FDC
That may be why yours works at 1.44mb when mine doesn't as mines a standard 1772

Re: TF536 on the ST

Posted: 13 Aug 2020 16:59
by Umberto1st
PhilC wrote: 13 Aug 2020 10:19
Umberto1st wrote: 13 Aug 2020 09:40

One other thing I have done on the V7 HD upgrade, is I am using a AJAX FDC
That may be why yours works at 1.44mb when mine doesn't as mines a standard 1772
Could be, but I also have a STFM set up for the TF534/536 with a ver 5 HD and a 1772 and it works

Re: TF536 on the ST

Posted: 14 Aug 2020 07:57
by Umberto1st
PhilC wrote: 13 Aug 2020 10:19
Umberto1st wrote: 13 Aug 2020 09:40

One other thing I have done on the V7 HD upgrade, is I am using a AJAX FDC
That may be why yours works at 1.44mb when mine doesn't as mines a standard 1772
Try turning cache off, you can do it in xboot or the general tab in the control panel. I have found that cache turned on can mess with the floppy.