Page 3 of 3
Re: Einstein a Go-Go
Posted: 19 Nov 2026 12:37
by peters
I once had a parcel farce delivery bounce back and forth between South Midlands and North Midlands delivery centres for over a week.
One delivery from the same company even went to Heathrow for some unknown reason.
I think PF is a job creation scheme for van drivers.
Re: Einstein a Go-Go
Posted: 19 Nov 2026 13:45
by Icky
Pictures, we need pictures :)
Re: Einstein a Go-Go
Posted: 19 Nov 2026 13:48
by rubber_jonnie
Icky wrote: 19 Nov 2026 13:45
Pictures, we need pictures :)
Sorry forgot to post this earlier:

- PXL_20261119_091327404.jpg (367.62 KiB) Viewed 25 times
Overall it's in very nice condition inside and out.
Re: Einstein a Go-Go
Posted: 19 Nov 2026 14:56
by rubber_jonnie
I've just gone back to look at the RAM and it seems that /WR (Pin 3) never goes low on the system RAM, and tracking back it's the same all the way back to the CPU and through the LS244 at I005.
It's never going below about 3.9-4v. It is pulsing slightly but but definitely not going low.
I guess that means I can't write to the RAM...
I'm starting to suspect a bad CPU, though it could be the LS244. Other CPU signals are good, but this one is not looking good.
Re: Einstein a Go-Go
Posted: 19 Nov 2026 15:28
by rubber_jonnie
OK, so I de-soldered /WR (Pin 22) of the CPU and made sure it wasn't contacting the VIA that goes over to the 74LS244 and re-scoped it.
I'm reasonably confident I have a dead CPU on my hands because it never goes active/low.
Pretty sure I'm unable to write to RAM...
Re: Einstein a Go-Go
Posted: 19 Nov 2026 20:06
by stephen_usher
Not another one! :-)