Page 3 of 21

Re: TF4060 Beta Program

Posted: 04 Jul 2024 17:53
by terriblefire
kludge wrote: 03 Jul 2024 13:05
terriblefire wrote: 03 Jul 2024 11:51 Drill file attached - T10 is the CPU holder drills i think .
Something like this, if I didn't make a typo somewhere


TF4060 rev 5 heatsink mounting holes.png
looks about right.

Re: TF4060 Beta Program

Posted: 04 Jul 2024 19:23
by kludge
gurrag wrote: 04 Jul 2024 17:42 hello do you have an stl availiable ?
would like to try this out :)
Working on a fixed version with the correct distances for the mounting holes, but I’ll post it here when done.

Re: TF4060 Beta Program

Posted: 04 Jul 2024 22:24
by kludge
gurrag wrote: 04 Jul 2024 17:42 hello do you have an stl availiable ?
Try these. I tried attaching the f3d and step files, but the forum wouldn't let me. I'll upload them to my GitHub later.

Heatsink holder.png

Re: TF4060 Beta Program

Posted: 24 Jul 2024 21:12
by terriblefire
New fw for the 4060 for those able to update.

Significant fixes.

IDE lockups sorted out.
SCSI issues fixed included weird DMA to chipram issue.
IDE speed at max pio.
tf4060r5_20611_2024_07_24_4252a06_alpha.zip

Re: TF4060 Beta Program

Posted: 25 Jul 2024 11:23
by alexh
Out of curiosity are any beta testers using Fastlane Z3 or Deneb?

Re: TF4060 Beta Program

Posted: 25 Jul 2024 12:00
by terriblefire
alexh wrote: 25 Jul 2024 11:23 Out of curiosity are any beta testers using Fastlane Z3 or Deneb?
Z3 Fastlane is one of my standard test setups. I have as standard tests

AA3000+ Onboard SCSI and ZZ9000
A4000T Onboard SCSI (NCR)
A4000 Z3 Fastlane
A4000 Mediator and MB IDE
A4000CR TFIDE

Its been an expensive thing to dev

Re: TF4060 Beta Program

Posted: 25 Jul 2024 12:19
by alexh
Thanks for the feedback. Very much appreciated.

It would be nice if someone in the Beta had a Deneb (Zorro III DMA master, USB Host Controller) but I understand they are very rare and expensive.

(I have one, I didn't pay for mine, I got it in exchange for sending M Boemer a box of Transdimension USB host controller chips for Subway when our company bought Transdimension)

Re: TF4060 Beta Program

Posted: 25 Jul 2024 12:31
by terriblefire
alexh wrote: 25 Jul 2024 12:19 Thanks for the feedback. Very much appreciated.

It would be nice if someone in the Beta had a Deneb (Zorro III DMA master, USB Host Controller) but I understand they are very rare and expensive.

(I have one, I didn't pay for mine, I got it in exchange for sending M Boemer a box of Transdimension USB host controller chips for Subway when our company bought Transdimension)
i don't think it will be an issue. If the NCR works everything DMA works. NCR does byte wide self modifying code and has its own scripts it executes in RAM.

Re: TF4060 Beta Program

Posted: 25 Jul 2024 19:30
by Chritoph
Hi there!

Good and bad news from the Amiga 3000T testing front:
Positive:
  • Works - kind of!
  • Can use Triton USB in Zorro3 mode + Floppy drive to boot into a working system
  • Can use a CyberVision64 / Zorro3 GFX card as well
  • latest version (2024-07-24 / 4252a06) fixed it hanging during initialization of Triton USB hanging after cold reboot
Negative:
  • Cannot (!!!) use Amiga 3000T onboard SCSI
    • My A3000T has: Ramsey 4, DMAC 2, WD 04
    • locks up immediately during - I guess - partition lookup as it happens before first DF0: access
Some ZuluSCSI config + logs attached below.

Re: TF4060 Beta Program

Posted: 25 Jul 2024 21:15
by terriblefire
Chritoph wrote: 25 Jul 2024 19:30 Hi there!

Good and bad news from the Amiga 3000T testing front:
Positive:
  • Works - kind of!
  • Can use Triton USB in Zorro3 mode + Floppy drive to boot into a working system
  • Can use a CyberVision64 / Zorro3 GFX card as well
  • latest version (2024-07-24 / 4252a06) fixed it hanging during initialization of Triton USB hanging after cold reboot
Negative:
  • Cannot (!!!) use Amiga 3000T onboard SCSI
    • My A3000T has: Ramsey 4, DMAC 2, WD 04
    • locks up immediately during - I guess - partition lookup as it happens before first DF0: access
Some ZuluSCSI config + logs attached below.
Oh thats interesting. We had a 3000T report that it was working last week. I shall ask chucky to get hold of freds 3000T again