Re: Logic analyser recommendations ?
Posted: 31 May 2023 15:25
Great thanks. I'll give it a go.beel1 wrote: 31 May 2023 12:15 Its protocol has been reversed and is supported by Sigrok it seems
https://sigrok.org/wiki/Sysclk_LWLA1034
We welcome retro users & hardware gurus alike! Come and join the party :)
https://www.exxosforum.co.uk/forum/
Great thanks. I'll give it a go.beel1 wrote: 31 May 2023 12:15 Its protocol has been reversed and is supported by Sigrok it seems
https://sigrok.org/wiki/Sysclk_LWLA1034
Okay thanks I will give that a try.beel1 wrote: 31 May 2023 22:31 You probably need to install the libusb driver from Zadig: https://sigrok.org/wiki/Windows#Device_ ... USB_driver
Once detected you will also need the FPGA firmware/bitstream files: https://sigrok.org/gitweb/?p=sigrok-fir ... 6a;hb=HEAD
My laptop is on Linux, but my main PC is win7.
Seems it was already installed but a slightly lesser version. Still cannot detect it in pulseview though :(beel1 wrote: 31 May 2023 22:31 You probably need to install the libusb driver from Zadig: https://sigrok.org/wiki/Windows#Device_ ... USB_driver
Someone tried this if it helps:exxos wrote: 31 May 2023 22:53 Seems it was already installed but a slightly lesser version. Still cannot detect it in pulseview though :(
http://sigrok.org/bugzilla/show_bug.cgi?id=650#c25Finally got it working on all my Windows 7/10 Systems.
This is what i did, with Zadiag :
Install libusb-Driver, re-connect Device, install winUSB-Driver, re-connect Device, install libusbK, re-connect Device, then again installed libusb.
And voila, started Pulsview and all OK.