Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 02 Feb 2021 20:50
by philbo34
Arrived today. On nights while sat .
Will build then and report progress
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 02 Feb 2021 20:59
by exxos
philbo34 wrote: 02 Feb 2021 20:50
Arrived today. On nights while sat .
Will build then and report progress
Have fun ;)
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 06 Feb 2021 09:55
by philbo34
Build underway. Just header pins to go but our fine solder has been nicked so will finish at home tomorrow. @exxos
Only question is that's the 22uf 63v cap for. A test or a bonus item
Or have a been too stupid and not read something
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 06 Feb 2021 10:01
by exxos
philbo34 wrote: 06 Feb 2021 09:55
Build underway. Just header pins to go but our fine solder has been nicked so will finish at home tomorrow.
@exxos
Only question is that's the 22uf 63v cap for. A test or a bonus item
Or have a been too stupid and not read something
Its to bodge on the cap on the reset circuit as your machine probably won't reset when the booster is installed..
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 06 Feb 2021 11:51
by HigashiJun
Still waiting for mine, but I guess distance matters...
:D
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 07 Feb 2021 15:06
by philbo34
Cap across ç100 ?
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 07 Feb 2021 19:39
by exxos
philbo34 wrote: 07 Feb 2021 15:06
Cap across ç100 ?
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 08 Feb 2021 20:02
by philbo34
Cheers.
What's best tech for soldering the headers.
I've got 0.6mm solder . 0.2mm tip
Cleaned board , plenty of flux but struggling to get solder to flow. Even tried upto 400c .
Or is it just lack of practice
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation
Posted: 08 Feb 2021 20:11
by exxos
philbo34 wrote: 08 Feb 2021 20:02
What's best tech for soldering the headers.
I've got 0.6mm solder . 0.2mm tip
Sounds like what I do...
Re: STE 32MHz PLUG IN BOOSTER (again) 2021 variation