exxos's Atari, Amiga & retro forum

Hi @PhilC Sorry the @mention grabbed the wrong Phil. ;)
I will follow your lead. I have an Atari Floppy so I may skip the pullups. Floppy works fine now.
Was my stack of board/socket/tos decoder/socket/tf536 the same as yours?
TY for the hint of using the diag card with a 68K in the system first. I'll do that between steps!

@tony.reynolds yes the stack is how I did mine.

You'll need to connect the wire from the decoder board to the ce pin on the dual tos board.

Right on, @PhilC

The attic is finally cool enough to work up there for about an hour.
This week:

• I soldered on all the headers on my MiST HW. No sense in being caught out.
• I recapped the MegaST's P/S yesterday and I had great success. It was fine practice with the Hakko desolderer. I'll do some more work off my soldering list and desoldering list before I do the SIP resistor pack replacements on my MegaST board itself.
  lst 4.png