exxos's Atari, Amiga & retro forum

Posted: **15 Feb 2020 22:52**

Sounds like bad / loose connections on the relocator.

Posted: **17 Feb 2020 07:45**

All pins soldered
If i use ide boots with 0 mb fast
If no ide atached and boot from floppy 2 mb memory

Posted: **17 Feb 2020 07:51**

Check ide cable length, should be approx 10cm
this usually happens when ide cable is too long

Posted: **17 Feb 2020 15:29**

Ok cut ide cable to 2cm and is beter
Sometimes lose fast ram. Un 5;to 6 times is ok

Posted: **17 Feb 2020 19:14**

at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables

Posted: **18 Feb 2020 01:01**

8 Bit Dreams wrote: 17 Feb 2020 19:14 at the moment You don't have FastRAM - Your speed is also like stock 7Mhz CPU,
it's because IDE isn't buffered, try to avoid long ide cables

Or buy an IDE buffer. Possibly i should make a cheap buffer design available so people can use one if they need.

exxos's Atari, Amiga & retro forum

Subzero79's build

Re: Subzero79's build

Re: Subzero79's build

Re: Subzero79's build

Re: Subzero79's build

Re: Subzero79's build

Re: Subzero79's build