exxos's Atari, Amiga & retro forum

GND (top) layer, nice solid route under and around the DAC...


VCC (bottom) layer...

I added in 2 more caps on VCC pins of the DAC since they are in stupid places.. Digital & analouge ended up mixed up as a result of it all.. but All likely better router than on the Falcon anyway.


EDIT:

PCB view...

I've ordered 10 PCBs and paid for UPS delivery.. Since the 1772 boards only went into production this morning, I have asked if those can be sent with the video boards so I hope to get both quicker then... £25 a go is a lot for UPS... but I should get the boards in a weeks time.. not 1-2months...

Just got a email saying the boards have been shipped :cheer: :cheer:

exxos wrote: 26 Oct 2018 14:10 Just got a email saying the boards have been shipped :cheer: :cheer:

:D - Looks like you are building up quite a set of boards that I need Exxos :)

Put me down for the 1772 buffer board and this one.

EDIT: just need to think of a few other things to add from your wed shop to add to that order :)

Same for me, ready for when I get it fixed :roll:

Then time to print some more supports.

Icky wrote: 26 Oct 2018 14:36 :D - Looks like you are building up quite a set of boards that I need Exxos :)

Yes :) When every chip on the board has a patch PCB on it, then our work is done! :lol:

exxos wrote: 26 Oct 2018 15:17

Icky wrote: 26 Oct 2018 14:36 :D - Looks like you are building up quite a set of boards that I need Exxos :)

Yes :) When every chip on the board has a patch PCB on it, then our work is done! :lol:

Agreed. I think we might have gone too far if we start putting patch boards on top of patch boards. :)

Icky wrote: 26 Oct 2018 15:31 Agreed. I think we might have gone too far if we start putting patch boards on top of patch boards. :)

Likely will happen ;)

Icky wrote: 26 Oct 2018 15:31 Agreed. I think we might have gone too far if we start putting patch boards on top of patch boards. :)

We could always turn to patch bays if we wanted :pullhair: :)

Hopefully the boards will come in a day or 2... What I will do is try to make one up for testing before anything else. No use you guys buying the chip and soldering it if the thing doesn't work ;)