Page 194 of 209

Re: Stuff and Things.

Posted: 15 Jan 2026 14:39
by PhilC
Got mine set up and thought I'd got some rooms too, will have to sort through them and see if I can get any to work. Otherwise the config is set and it displays, just says synth unavailable just now.

Re: Stuff and Things.

Posted: 15 Jan 2026 16:25
by rubber_jonnie
PhilC wrote: 15 Jan 2026 14:39 Got mine set up and thought I'd got some rooms too, will have to sort through them and see if I can get any to work. Otherwise the config is set and it displays, just says synth unavailable just now.
Try this, mine came from here.

Mine is now 100% tested :)

I hooked it up to Notator on one of my Mega ST's:

Notator_2.jpg

And you can see the channel bars doing their thang:

IMG20260115160855.jpg

I did make a config boo boo though, I had output set as pwm but it should have been set to i2s as it was the DAC output I was using and not the headphone jack. I've updated the config on my earlier post to reflect that.

Both MT-32 and Soundfont mode worked just fine.

Need to go and get some of the midi enable games and test them out :)

Re: Stuff and Things.

Posted: 15 Jan 2026 16:34
by PhilC
@rubber_jonnie thanks, have downloaded and will give them a try.

Re: Stuff and Things.

Posted: 15 Jan 2026 16:40
by rubber_jonnie
PhilC wrote: 15 Jan 2026 16:34 @rubber_jonnie thanks, have downloaded and will give them a try.
Follow the exact instructions on GitHub and you'll be fine.

Re: Stuff and Things.

Posted: 16 Jan 2026 09:37
by rubber_jonnie
PhilC wrote: 15 Jan 2026 16:34 @rubber_jonnie thanks, have downloaded and will give them a try.
FYI having run mine for a while (The Pi MT-32) the Pi get's pretty warm so I'm going to slap some heatsinks on the Pi, you may need to do the same.

Re: Stuff and Things.

Posted: 16 Jan 2026 09:43
by PhilC
rubber_jonnie wrote: 16 Jan 2026 09:37
PhilC wrote: 15 Jan 2026 16:34 @rubber_jonnie thanks, have downloaded and will give them a try.
FYI having run mine for a while (The Pi MT-32) the Pi get's pretty warm so I'm going to slap some heatsinks on the Pi, you may need to do the same.
:thumbup:

Re: Stuff and Things.

Posted: 16 Jan 2026 10:42
by rubber_jonnie
PhilC wrote: 16 Jan 2026 09:43
rubber_jonnie wrote: 16 Jan 2026 09:37

FYI having run mine for a while (The Pi MT-32) the Pi get's pretty warm so I'm going to slap some heatsinks on the Pi, you may need to do the same.
:thumbup:
Heatsinks fitted and under test.

Re: Stuff and Things.

Posted: 05 Feb 2026 10:37
by rubber_jonnie
Just thought I'd get a nice panoramic view of everything running this morning :)

IMG20260205091447.jpg

Makes me smile :)

Re: Stuff and Things.

Posted: 05 Feb 2026 10:40
by exxos
rubber_jonnie wrote: 05 Feb 2026 10:37 Just thought I'd get a nice panoramic view of everything running this morning :)
:thumbup:

That's way too tidy though..

I can just about see the Phoenix mug as well ;)

Re: Stuff and Things.

Posted: 05 Feb 2026 10:55
by rubber_jonnie
exxos wrote: 05 Feb 2026 10:40
rubber_jonnie wrote: 05 Feb 2026 10:37 Just thought I'd get a nice panoramic view of everything running this morning :)
:thumbup:

That's way too tidy though..

I can just about see the Phoenix mug as well ;)
It's also my home office so I need to keep it reasonable. Well spotted on the mug :)