Page 19 of 336
Re: exxos blog - random goings on
Posted: 23 May 2019 13:26
by exxos
rubber_jonnie wrote: 23 May 2019 10:00
Damn me and my weak will, I just fed Harry again, 2 PSU leads and an IDE interface.....
I am so weak and have no will of my own......
:lolbig: :bravo:
Re: exxos blog - random goings on
Posted: 23 May 2019 14:49
by exxos
This bunch of crap just turned up... I guess I will have to sort it all out now..
IMG_4201.JPG
Re: exxos blog - random goings on
Posted: 23 May 2019 19:01
by PhilC
Nah, just throw it in the pile with all the other long lost boards, never to be seen again :P :D
Well, except the VGA adaptor boards, I like them ;)
Re: exxos blog - random goings on
Posted: 23 May 2019 19:05
by exxos
PhilC wrote: 23 May 2019 19:01
Nah, just throw it in the pile with all the other long lost boards, never to be seen again :P :D
Well, except the VGA adaptor boards, I like them ;)
Yeah.. So many projects all arriving at once again :roll:
Re: exxos blog - random goings on
Posted: 23 May 2019 19:08
by PhilC
exxos wrote: 23 May 2019 19:05
Yeah.. So many projects all arriving at once again :roll:
Lemme know if you need a hand, I ave some time somewhere in between sleeping and going to work..... somewhere.....
Re: exxos blog - random goings on
Posted: 23 May 2019 22:09
by exxos
rubber_jonnie wrote: 23 May 2019 09:01
Not impressed, the print job stopped about 2 hours in for some reason. At first I thought my print server had rebooted, but no. No logs as to why it stopped either. Need to print it again now :(
On no.. to many hops and jumps ;)
Re: exxos blog - random goings on
Posted: 24 May 2019 14:53
by exxos
oooo found me a Virgin F2 TOS104 :shock: :shock: Oddly the PSG is in a socket, but original solder..
IMG_4221.JPG
Re: exxos blog - random goings on
Posted: 24 May 2019 15:56
by exxos
Really need to get me one of these...
large-3d-printers3.jpg
http://www.modix3d.com/?affcode=g994868 ... gLeWPD_BwE
Re: exxos blog - random goings on
Posted: 24 May 2019 16:01
by PhilC
Looks nice but between all the motherboards and the cat, you don't have any more floor space!
Bet its expensive too.
Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC? :)
Re: exxos blog - random goings on
Posted: 24 May 2019 20:45
by exxos
PhilC wrote: 24 May 2019 16:01
Looks nice but between all the motherboards and the cat, you don't have any more floor space!
That is true. I would seriously have to love a good sort out in order to generate that much room!
PhilC wrote: 24 May 2019 16:01
Bet its expensive too.
About £3,500, but its overseas, so probably end up double that cost after shipping and import taxes :roll:
PhilC wrote: 24 May 2019 16:01
Hmmm, doubles up as a heated cat box when not in use. Set the bed temp for say 40oC? :)
Cat doesn't live with me so wouldn't be a problem anyway :)
But seriously, I would consider saving up and getting one of these printers with the possibility of printing STFM cases etc...