Looking at the CT60 PSU connector, I noticed it actually has -12 wired to the SV connector, and PSON is wired.. But on the CT60 PSU both are missing ?
Id assume the PSON is the control in which allows the CT60 to turn on /off the ATX PSU. But that signal is totally missing on the CT60 PSU . So I assume nobody uses that feature ? Or just don't care if there's a power on off switch anyway, so probably doesn't matter ?
But the CT60 PSON looks like a toggle on/off, so I'm a bit confused what's actually turning the whole thing on in the first place ? I assume things like the pico psu don't even use the PSON signal ?
I never heard of SV needed -12 V ?
Also, what was that issue where the voltages had to come up in a certain order or something ?
- 1.PNG (46.27 KiB) Viewed 23 times
- 2.jpg (38.31 KiB) Viewed 23 times
I've also decided the power cables will be modulor. There will just be a ATX power cable from CT60 to PSU board. Similar with Falcon power cable. The CT60e doesn't need the Falcon power cable. So if its a unpluggable cable, then it can just be left off.
The IDE port is in the way. Will have to probably do some sort of over-head mounting bracket above the PSU itself so the CF card can be mounted that way. No idea. But nowhere else to really mount it.